PolyLite-PETG Technical Data Sheet
PolyLite PETG Technical Data Sheet
Product Identification
| Product Name |
PolyLite_PETG |
| Product Use |
3D Printing Filament |
| Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
| Address |
2901 Auburn Rd, Auburn Hills, MI 48326 |
| Contact Email |
info@rev1tech.com |
| Telephone |
+248-707-2950 |
| Emergency Telephone Number |
+248-707-2950 |
Material Properties
| Density |
ISO1183, GB/T1033 |
1.25 g/cm³ at 23°C |
| Melt Index |
240°C, 2.16kg |
10.8 g/10min |
| Light Transmission |
GB/T 2410 |
90% |
| Flame Retardancy |
N/A |
N/A |
| Effect of Weak Acids |
Not resistant |
| Effect of Strong Acids |
Not resistant |
| Effect of Weak Alkalis |
Not resistant |
| Effect of Strong Alkalis |
Not resistant |
| Effect of Organic Solvent |
Resistant most |
| Effect of Oils and Grease |
No data available |
| Equilibrium Water Absorption (%) |
0.54% |
Thermal Properties
| Glass Transition Temperature |
DSC, 10°C/min |
81 °C |
| Vicat Softening Temperature |
ISO 306, GB/T 1633 |
84 °C |
| Heat Deflection Temperature |
ISO 75 1.8MPa |
74.8 °C |
| Heat Deflection Temperature |
ISO 75 0.45MPa |
78.4 °C |
Mechanical Properties
| Young’s Modulus (X-Y) |
ISO 527, GB/T 1040 |
1472 ± 270 MPa |
| Young’s Modulus (Z) |
1087 ± 79 MPa |
| Tensile Strength (X-Y) |
ISO 527, GB/T 1040 |
31.9 ± 1.1 MPa |
| Tensile Strength (Z) |
13.4 ± 2.0 MPa |
| Elongation at Break (X-Y) |
ISO 527, GB/T 1040 |
6.8 ± 0.9 % |
| Elongation at Break (Z) |
1.3 ± 0.2 % |
| Bending Modulus (X-Y) |
ISO 178, GB/T 9341 |
1174 ± 64 MPa |
| Bending Strength (X-Y) |
ISO 178, GB/T 9341 |
53.7 ± 2.4 MPa |
| Charpy Impact Strength (X-Y) |
ISO 179, GB/T 1043 |
5.1 ± 0.3 kJ/m² |
Printing Guidelines
- It is highly recommended to use the PolyBox™ when printing with PolyLite™ PETG and to store it in the resealable bag.
- Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different nozzle diameters.
| Nozzle Temperature |
230 – 240 °C |
| Build Surface Material |
BuildTak®, Glass |
| Build Surface Treatment |
Glue |
| Build Plate Temperature |
70 - 80 °C |
| Cooling Fan |
OFF-20% |
| Printing Speed |
30-50 mm/s |
| Raft Separation Distance |
0.14 mm |
| Retraction Distance |
1 mm |
| Retraction Speed |
20 mm/s |
| Environmental Temperature |
Room temperature |
| Threshold Overhang Angle |
60° |
| Recommended Support Material |
PolyDissolve™ S1 |
The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.
Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Polymaker materials for the intended application. Rev1Tech makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Rev1Tech shall not be made liable for any damage, injury, or loss induced from the use of Rev1Tech materials in any application.
Click here to shop PolyLitePETG.
Related Articles
PolyMax-PETG Technical Data Sheet
PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...
Polylite ABS Tech data sheet
Product Technical Data Sheet Identification Product Name: Polylite ABS Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...
PolyLite PLA Pro Technical Data Sheet
Technical Data Sheet Product Identification Product Name PolyLite PLA Pro Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone ...
PolySonic PLA Pro Technical Data Sheet
Technical Data Sheet: PolySonic PLA Pro Identification Product Name: PolySonic_PLA_Pro_ Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: ...
PolyLite PLA-CF Technical Data Sheet
PolyLite PLA-CF Technical Data Sheet Product Identification Product Name PolyLite PLA-CF Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email ...