PolyFlex TPU90 Safety Data Sheet

Product Identification

Material Name	PolyFlex TPU90
Product Use	3D Printing Filament
Manufacturer/Supplier	JF Polymers (Suzhou) Co., Ltd.
Address	Building 6&7&11, No.2, Hai Cheng Road, Chang Shu Economic & Technological Development Zone, 215513, People’s Republic of China
Contact Person (E-mail)	info@rev1tech.com
Telephone	+86-512-52058005
Emergency Telephone Number	+86-512-52058005

GHS Classification	Physical hazards: Not classified Health hazards: Not classified Environmental hazards: Not classified
GHS Label Elements	Hazard Pictograms: No hazard pictogram is used. Signal word: No signal word is used. Hazard statement: Not applicable. Precautionary statement: Prevention: Not applicable. Response: Not applicable. Storage: Not applicable. Disposal: Not applicable.
Other hazards	Not available.

This product does not contain hazardous ingredients above cut-off value according to HCS2012.

Eye Contact	Flush with running water for at least 15 minutes. If irritation persists, get medical attention.
Skin Contact	Wash thoroughly with soap and water. Get medical attention if irritation persists.
Inhalation	If breathed in, remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical attention.
Ingestion	A physician or poison control center can be contacted for advice.

Flammable Properties	Not available.
Suitable Extinguishing Media	Use extinguishers suitable for surrounding fire.
Firefighting Equipment/Instructions	Wear self-contained breathing apparatus for fire fighting if necessary.
Hazardous Combustion Products	Carbon oxides.

Personal Precautions	Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas.
Environmental Precautions	Avoid disposing into drainage/sewer system or directly into the aquatic environment.
Methods for Cleaning Up	Sweep up and shovel into suitable containers. Clean up affected area.

Handling	Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.
Storage	Store in a cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

	Eye/Face Protection: No special protection required. Skin Protection: No special protection required. Respiratory Protection: No special protection required. General Hygiene Considerations: Wash hands, forearms, and face thoroughly after handling chemical products, before eating, smoking, and using the lavatory, and at the end of the working period.

Related Articles
Polymaker PC-ABS Safety Data Sheet
Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...
PolyFlex TPU90 Technical Data Sheet
PolyFlex TPU90 Technical Data Sheet Product Identification Product Name PolyFlex TPU90 Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email ...
PolyFlexTPU95 Safety Data Sheet
Identification Product Name PolyFlex TPU95 Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone +248-707-2950 Emergency ...
PolyFlex TPU95 Technical Data Sheet
Technical Data Sheet Identification Product Name PolyFlex TPU95 Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone ...
PolyFlex TPU95-HF Tech Data Sheet
PolyFlex TPU95-HF Tech Data Sheet Product Name: PolyFlex TPU95-HF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...