PolyFlexTPU95 Safety Data Sheet
Identification
| Product Name |
PolyFlex TPU95 |
| Product Use |
3D Printing Filament |
| Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
| Address |
2901 Auburn Rd, Auburn Hills, MI 48326 |
| Contact Email |
info@rev1tech.com |
| Telephone |
+248-707-2950 |
| Emergency Telephone Number |
+248-707-2950 |
1. Product and Company Identification
| Material name |
PolyFlex TPU95 |
| CAS # |
See section 3 |
| Product code |
- |
| Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
| Address |
Building 6&7&11, No.2, Hai Cheng Road, Chang Shu Economic & Technological Development Zone, 215513, People’s Republic of China |
| Contact person(E-mail) |
zhenggang.cai@rev1tech.com |
| Telephone |
+86-512-52058005 |
| Fax |
- |
| Emergency telephone Number |
+86-512-52058005 |
2. Hazards identification
| GHS classification |
Not classified |
| Physical hazards |
Not classified |
| Health hazards |
Not classified |
| Environmental hazards |
Not classified |
This product does not contain hazardous ingredients above cut-off value according to HCS2012.
4. First Aid Measures
| Eye contact |
None expected to require first aid measures. Flush with running water for at least 15 minutes. If irritation persists get medical attention. |
| Skin contact |
None expected to require first aid measures. Wash thoroughly with soap and water. Get medical attention in the unlikely event that irritation persists. |
| Inhalation |
None expected to require first aid measures. If breathed in, remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical attention. |
| Ingestion |
Immediate first aid is not likely to be required. A physician or poison control center can be contacted for advice. |
| Notes to physician |
Treat symptoms. |
5. Fire Fighting Measure
| Flammable properties |
Not available |
| Suitable extinguishing media |
Use extinguishers suitable for surrounding fire. |
| Unsuitable extinguishing media |
Not available |
| Firefighting equipment/instructions |
Wear self contained breathing apparatus for fire fighting if necessary. |
| Hazardous combustion products |
Carbon oxides. |
6. Accidental Release Measures
| Personal precautions |
Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas. |
| Environmental precautions |
Avoid disposing into drainage/sewer system or directly into the aquatic environment. |
| Methods for cleaning up |
Sweep up and shovel into suitable containers. Clean up affected area. |
7. Handling and Storage
| Handling |
Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling. |
| Storage |
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. |
8. Exposure Controls / Personal Protection
| Occupational exposure limits |
This product has no PEL, TLV, or other recommended exposure limit. |
| Biological limit values |
No biological exposure limits noted for the ingredient(s). |
| Appropriate engineering controls |
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. |
Individual protection measures, such as personal protective equipment:
| Eye / face protection |
No special protection required. |
| Skin protection |
No special protection required. |
| Respiratory protection |
No special protection required. |
| General hygiene considerations |
Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. |
9. Physical & Chemical Properties
| Appearance |
Solid |
| Form |
Solid |
| Color |
Translucent |
| Odor |
Odorless |
| Odor threshold |
Not available |
| pH |
Not available |
| Vapor pressure |
Not available |
| Vapor density |
Not available |
| Boiling point |
Not available |
| Melting point/Freezing point |
Not available |
| Solubility (water) |
Insoluble |
| Relative Density |
1.18-1.23 |
| Flash point |
Not available |
| Partition coefficient |
Not available |
| Flammability limits in air, upper, % by volume |
Not available |
| Flammability limits in air, lower, % by volume |
Not available |
| Auto-ignition temperature |
Not available |
| VOC |
Not available |
| Percent volatile |
Not available |
| Molecular Formula |
Not available |
| Molecular Weight |
Not available |
| Viscosity |
Not available |
| Dissociation constant |
Not available |
| Reactivity |
The substance is stable under normal storage and handling conditions. |
| Chemical stability |
Material is stable under normal conditions. |
| Conditions to avoid |
Incompatible materials. |
| Incompatible materials |
Strong oxidizing agents. |
| Hazardous decomposition products |
Carbon oxides. |
| Possibility of hazardous reactions |
No hazardous reactions known. |
| Toxicokinetics, metabolism and distribution: |
Non-human toxicological data: Not available |
| Acute toxicity |
- LD50(Oral, Rat): Not available
- LD50(Dermal, Rabbit): Not available
- LC50(Inhalation, Rat): Not available
|
| Skin corrosion/Irritation |
Not classified |
| Serious eye damage/irritation |
Not classified |
| Respiratory or skin sensitization |
Not classified |
| Germ cell mutagenicity |
Not classified |
| Carcinogenicity |
Not classified |
| Reproductive toxicity |
Not classified |
| STOT- single exposure |
Not classified |
| STOT-repeated exposure |
Not classified |
| Aspiration hazard |
Not classified |
| Toxicity |
- LC50 N/A 96h Fish OECD 203 N/A N/A
- EC50 N/A 48h Daphnia OECD 202 N/A N/A
- EC50 N/A 72h Algae OECD 201 N/A N/A
|
| Persistence and degradability |
Not available |
| Bioaccumulative potential |
Not available |
| Mobility in soil |
Not available |
| Results of PBT&vPvB assessment |
Not available |
| Other adverse effects |
Not available |
13. Disposal Considerations
| Disposal instructions |
Dispose of contents/container in accordance with local/regional/national/international regulations. |
| Contaminated packaging |
Since emptied containers may retain product residue, follow label warnings even after container is emptied. |
DOT
| UN number |
Not regulated |
| Proper shipping name |
Not regulated |
| Hazard class |
Not regulated |
| Packing group |
Not regulated |
| Environmental hazards |
No |
IATA
| UN number |
Not regulated |
| UN proper shipping name |
Not regulated |
| Transport hazard class(es) |
Not regulated |
| Packing group |
Not regulated |
| Environmental hazards |
No |
IMDG
| UN number |
Not regulated |
| UN proper shipping name |
Not regulated |
| Transport hazard class(es) |
Not regulated |
| Packing group |
Not regulated |
| Environmental hazards |
No |
| US federal regulations |
This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. |
| TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) |
Not regulated. |
| OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) |
Not listed. |
| Superfund Amendments and Reauthorization Act of 1986 (SARA) |
- Hazard categories: Immediate Hazard - No, Delayed Hazard - No, Fire Hazard - No, Pressure Hazard - No, Reactivity Hazard - No
- SARA 302 Extremely hazardous substance: No
- SARA 311/312 Hazardous chemical: No
- SARA 313 (TRI reporting): Not regulated.
|
Issue date: 15-Oct-2021
Revision date: 01-Nov-2022
Version #: 01
HMIS® ratings: Health: 0, Flammability: 0, Physical hazard: 0
Click here to shop PolyFlexTPU95.
Related Articles
PolyFlex TPU90 Safety Data Sheet
PolyFlex TPU90 Safety Data Sheet Product Identification Product Name PolyFlex TPU90 Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com ...
Polymaker PC-ABS Safety Data Sheet
Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...
PolyMax™ PLA Safety Data Sheet
PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...
PolyFlex TPU95 Technical Data Sheet
Technical Data Sheet Identification Product Name PolyFlex TPU95 Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone ...
PolyFlex TPU95-HF Safety Data Sheet
PolyFlex TPU95-HF Safety Data Sheet Product Name: PolyFlex TPU95-HF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...