Product Name: PolyFlex TPU95-HF
Product Use: 3D Printing Filament
Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd.
Address: 2901 Auburn Rd, Auburn Hills, MI 48326
Contact Email: info@rev1tech.com
Telephone: +248-707-2950
Emergency Telephone Number: +248-707-2950
PolyFlex™ TPU95-HF, created from Covestro’s Addigy® family, is a TPU with high flow properties making it ideal for high speed printing. Combined with its UV resistance, PolyFlex™ TPU95-HF unlocks new applications for flexible materials in manufacturing.
| Property | Standard | Value |
|---|---|---|
| Density | ISO1183, GB/T1033 | 1.16 g/cm³ at 23°C |
| Melt index | 185°C, 1.2 kg | 9.3 g/10min |
| Light transmission | N/A | N/A |
| Flame retardancy | N/A | N/A |
| Effect of weak acids | N/A | Not resistant |
| Effect of strong acids | N/A | Not resistant |
| Effect of weak alkalis | N/A | Not resistant |
| Effect of strong alkalis | N/A | Not resistant |
| Effect of organic solvent | N/A | No data available |
| Effect of oils and grease | N/A | No data available |
| Equilibrium water absorption (%) | N/A | 0.69% |
| Property | Standard | Value |
|---|---|---|
| 100% modulus (X-Y) | ISO 37, GB/T 528 | 13.24 ± 0.29 MPa |
| Tensile strength (X-Y) | ISO 37, GB/T 528 | 23.11 ± 0.63 MPa |
| Elongation at break (X-Y) | ISO 37, GB/T 528 | 462.3 ± 21.1% |
| Shore hardness | ISO 7619-1, GB/T 531.1 | 95A |
The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.
Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Rev1Tech materials for the intended application. Rev1Tech makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Rev1Tech shall not be made liable for any damage, injury, or loss induced from the use of Rev1Tech materials in any application.
Click here to shop PolyFlexTPU95-HF.