ThermaX HTS1 Safety Data Sheet | Rev1Tech 3D Printing Filament SDS

ThermaX HTS1 SAFETY DATA SHEET

Safety Data Sheet

Section 1: Identification

Product Name ThermaX HTS1
Product Use 3D Printing Filament
Manufacturer/Supplier Rev1Tech
904 36th Street, Suite B
Grand Rapids MI 49500 USA
Address 2901 Auburn Rd,
Auburn Hills, MI 48326
Contact Email info@rev1tech.com
Telephone +248-707-2950
Emergency Telephone Number +248-707-2950

Section 2: Hazard(s) Identification

Classification of the Substance or Mixture: Not classified as hazardous according to OSHA Hazard Communication Standard (29 CFR 1910.1200).

GHS Label Elements: None required.

Section 3: Composition/Information on Ingredients

Ingredient CAS Number Weight (%)
Proprietary Polymer Blend -- 100%

Section 4: First-Aid Measures

Inhalation: If inhaled, remove to fresh air. If breathing is difficult, give oxygen and seek medical attention.

Skin Contact: Wash with soap and water. If irritation persists, seek medical attention.

Eye Contact: Rinse immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation develops.

Ingestion: If swallowed, rinse mouth with water. Seek medical attention if symptoms occur.

Section 5: Fire-Fighting Measures

Suitable Extinguishing Media: Water spray, foam, dry chemical, or carbon dioxide.

Specific Hazards: Combustion may produce irritating or toxic gases.

Protective Equipment: Firefighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Section 6: Accidental Release Measures

Personal Precautions: Use personal protective equipment. Avoid dust formation.

Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

Methods for Cleaning Up: Sweep up and shovel. Keep in suitable, closed containers for disposal.

Section 7: Handling and Storage

Handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols.

Storage: Keep container tightly closed in a dry and well-ventilated place.

Section 8: Exposure Controls/Personal Protection

Exposure Limits: No data available.

Engineering Controls: Ensure adequate ventilation, especially in confined areas.

Personal Protective Equipment:

  • Eye/Face Protection: Safety glasses with side-shields.
  • Skin Protection: Wear protective gloves.
  • Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.

Section 16: Other Information

This Safety Data Sheet (SDS) is provided as a courtesy to assist in the safe handling and storage of this product. All information contained herein is provided in good faith and is believed to be correct as of the date hereof.

For more information, please visit our website: www.rev1tech.com


Click here to shop ThermaX HTS1.

    • Related Articles

    • PolyMax™ PLA Safety Data Sheet

      PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...
    • PolySmooth Safety Data Sheet

      Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) 1. Identification Product Name: PolySmooth Product Use: 3d Printing filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, ...
    • SAFETY DATA SHEET Obsidian™ PA6+CF 3D Printing Filament

      SAFETY DATA SHEET Obsidian™ PA6+CF 3D Printing Filament EFFECTIVE DATE: 08 / 01 / 2022 REVISION NUMBER: V1.1 1 PRODUCT AND SUPPLIER INFORMATION Product Identification: Product Name: Obsidian™ PA6+Carbon Fiber (CF) Chemical Name: Polyamide (PA) ...
    • PolySonic_PLA Safety Data Sheet

      Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) 1. Product and Company Identification Product Name PolySonic_PLA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn ...
    • PolySonic PLA Pro Safety Data Sheet

      Safety Data Sheet 1. Product and Company Identification Product Name PolySonic PLA Pro Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email ...