PolySonic PLA Pro Safety Data Sheet
Safety Data Sheet
1. Product and Company Identification
Product Name |
PolySonic PLA Pro |
Product Use |
3D Printing Filament |
Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
Address |
2901 Auburn Rd, Auburn Hills, MI 48326 |
Contact Email |
info@rev1tech.com |
Telephone |
+248-707-2950 |
Emergency Telephone Number |
+248-707-2950 |
2. Hazards Identification
- GHS Classification: Not classified
- Physical Hazards: Not classified
- Health Hazards: Not classified
- Environmental Hazards: Not classified
- GHS Label Elements: No hazard pictogram is used.
This product does not contain hazardous ingredients above cut-off value according to HCS2012.
4. First Aid Measures
- Eye Contact: Flush with running water for at least 15 minutes. If irritation persists, get medical attention.
- Skin Contact: Wash thoroughly with soap and water. Get medical attention if irritation persists.
- Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Seek medical attention if unwell.
- Ingestion: Immediate first aid is not likely to be required. Contact a physician or poison control center for advice.
5. Fire Fighting Measures
- Flammable Properties: Not available.
- Suitable Extinguishing Media: Use extinguishers suitable for surrounding fire.
- Firefighting Equipment/Instructions: Wear self-contained breathing apparatus if necessary.
- Hazardous Combustion Products: Carbon oxides.
6. Accidental Release Measures
- Personal Precautions: Use personal protective equipment. Ensure adequate ventilation.
- Environmental Precautions: Avoid disposing into drainage/sewer system or directly into the aquatic environment.
- Methods for Cleaning Up: Sweep up and shovel into suitable containers.
7. Handling and Storage
- Handling: Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.
- Storage: Store in a cool, dry place. Keep container tightly closed.
8. Exposure Controls / Personal Protection
- Occupational Exposure Limits: No PEL, TLV, or other recommended exposure limit.
- Appropriate Engineering Controls: Handle in accordance with good industrial hygiene and safety practice.
- Personal Protective Equipment: No special protection required.
9. Physical & Chemical Properties
- Appearance: Solid
- Color: Various
- Odor: Not available
- Melting Point/Freezing Point: Not available
- Solubility (water): Insoluble
- Chemical Stability: Material is stable under normal conditions.
- Incompatible Materials: Strong oxidizing agents.
- Hazardous Decomposition Products: Carbon oxides.
- Acute Toxicity: Not available
- Skin Corrosion/Irritation: Not classified
- Serious Eye Damage/Irritation: Not classified
- Carcinogenicity: Not classified
- Toxicity: Not available
- Persistence and Degradability: Not available
- Bioaccumulative Potential: Not available
13. Disposal Considerations
Dispose of contents/container in accordance with local/regional/national/international regulations.
- DOT: Not regulated
- IATA: Not regulated
- IMDG: Not regulated
- US Federal Regulations: Not regulated under TSCA, SARA, CERCLA, or OSHA.
The information in the sheet was written based on the best knowledge and experience currently available.
Issue Date: 23-03-2023
Click here to shop PolySonic PLA Pro.
Related Articles
PolySonic_PLA Safety Data Sheet
Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) 1. Product and Company Identification Product Name PolySonic_PLA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn ...
PolySonic PLA Pro Technical Data Sheet
Technical Data Sheet: PolySonic PLA Pro Identification Product Name: PolySonic_PLA_Pro_ Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: ...
PolyLite™ PLA Pro Safety Data Sheet
Safety Data Sheet PolyLite™ PLA Pro 1. Product and Company Identification Product Name PolyLite™ PLA Pro Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact ...
PolyMax™ PLA Safety Data Sheet
PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...
PolySonic™ PLA Technical Data Sheet
PolySonic™ PLA Technical Data Sheet Product Name: PolySonic_PLA Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...