"PolySmooth Safety Data Sheet - Comprehensive SDS for 3D Printing Filament"

PolySmooth Safety Data Sheet

Safety Data Sheet

According to Hazard Communication Standard (29 CFR 1910.1200)

1. Identification

Product Name:       PolySmooth
Product Use:        3d Printing filament

Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd.

Address:               2901 Auburn Rd, Auburn Hills, MI 48326

Contact Email:     info@rev1tech.com

Telephone:           +248-707-2950

Emergency Telephone Number: +248-707-2950

2. Hazard(s) Identification

GHS classification:

  • Physical hazards: Not classified
  • Health hazards: Not classified
  • Environmental hazards: Not classified

GHS label elements:

Hazard Pictograms: No hazard pictogram is used.

Signal word: No signal word is used.

Hazard statement: Not applicable.

Precautionary statement:

  • Prevention: Not applicable.
  • Response: Not applicable.
  • Storage: Not applicable.
  • Disposal: Not applicable.

3. Composition / Information on Ingredients

This product does not contain hazardous ingredients above cut-off value according to HCS2012.

4. First-aid Measures

First aid procedures:

  • Eye contact: Flush with running water for at least 15 minutes. If irritation persists get medical attention.
  • Skin contact: Wash thoroughly with soap and water. Get medical attention in the unlikely event that irritation persists.
  • Inhalation: If breathed in, remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical attention.
  • Ingestion: Immediate first aid is not likely to be required. A physician or poison control center can be contacted for advice.

Notes to physician: Treat symptoms.

5. Fire-fighting Measures

Flammable properties: Not available.

Extinguishing media:

  • Suitable extinguishing media: Use water spray, alcohol resistant foam, dry powder or carbon dioxide to extinguish the fire.
  • Unsuitable extinguishing media: Avoid using DC water to extinguish fire, so as to avoid material splashes and fire spread.

Firefighting equipment/instructions: In case of fire and/or explosion do not breathe fumes. Protective respirator with independent air supply. According to size of fire Full protection, if necessary. Dispose of contaminated extinction water according to official regulations.

Hazardous combustion products: Carbon oxides, nitrogen oxides.

6. Accidental Release Measures

Personal precautions: Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Avoid contact with skin and eyes. For personal protection see section 8.

Environmental precautions: Avoid disposing into drainage/sewer system or directly into the aquatic environment.

Methods for cleaning up: Sweep up and shovel into suitable containers. Clean up affected area.

7. Handling and Storage

Handling: Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.

Storage: Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

8. Exposure Controls / Personal Protection

Occupational exposure limits: This mixture has no ingredients that have PEL, TLV, or other recommended exposure limit.

Biological limit values: No biological exposure limits noted for the ingredient(s).

Appropriate engineering controls: Use in a well-ventilated area.

Individual protection measures, such as personal protective equipment:

  • Eye / face protection: Chemical safety goggles.
  • Skin protection: Wear suitable protective clothing to prevent skin exposure.
  • Respiratory protection: Suitable respiratory protective device recommended.
  • General hygiene considerations: Wash hands, forearms, and face thoroughly after handling chemical products, before eating, smoking and using the lavatory, and at the end of the working period. Keep away from foodstuffs, beverages, and feed. Immediately remove all soiled and contaminated clothing.

9. Physical and Chemical Properties

Property Value
Physical state Solid
Form Solid
Color Translucent
Odor Odorless
Odor threshold Not available
pH Not available
Vapor pressure Not available
Melting point/Freezing point Not available
Initial boiling point and boiling range Not available
Flash point Not available
Evaporation rate Not available
Flammability (solid, gas) Not available
Explosion limits Not available
Vapor density Not available
Density 1.08-1.10
Solubility (water) Insoluble
Partition coefficient Not available
Auto-ignition temperature Not available
Decomposition temperature Not available
Specific gravity Not available
Flammability limits in air, upper, %by volume Not available
Flammability limits in air, lower, % by volume Not available
VOC Not available
Percent volatile Not available
Viscosity Not available
Surface tension Not available

10. Stability and Reactivity

Chemical stability: Material is stable under normal conditions.

Conditions to avoid: Incompatible materials.

Incompatible materials: Avoid contact with other chemicals, oxidizing agents, strong alkalis, and strong acids.

Hazardous decomposition products: Carbon oxides, nitrogen oxides.

Possibility of hazardous reactions: No dangerous reactions known.

11. Toxicological Information

Toxicokinetics, metabolism, and distribution: Not available

Information on toxicological effects:

  • Acute toxicity: Not available
  • Skin corrosion/Irritation: Not classified.
  • Serious eye damage/irritation: Not classified
  • Respiratory or skin sensitization: Not classified
  • Germ cell mutagenicity: Not classified
  • Carcinogenicity: Not classified
  • Reproductive toxicity: Not classified
  • STOT- single exposure: Not classified
  • STOT-repeated exposure: Not classified
  • Aspiration hazard: Not classified

12. Ecological Information

Toxicity:

Acute toxicity Time Species Method Evaluation Remarks
EC50 N/A 72h Fish OECD 203 N/A N/A
EC50 N/A 48h Daphnia OECD 202 N/A N/A
EC50 N/A 72h Algae OECD 201 N/A N/A

Persistence and degradability: Not available.

Bioaccumulative potential: Not available.

Mobility in soil: Not available.

Results of PBT&vPvB assessment: Not available.

Other adverse effects: No known significant effects or critical hazards.

13. Disposal Considerations

Disposal instructions: Dispose of contents/container in accordance with local/regional/national/international regulations.

Contaminated packaging: Since emptied containers may retain product residue, follow label warnings even after container is emptied.

14. Transport Information

DOT

Basic shipping requirements:

  • UN number: Not regulated
  • Proper shipping name: Not regulated
  • Hazard class: Not regulated
  • Packing group: Not regulated
  • Environmental hazards: No

IATA

  • UN number: Not regulated
  • UN proper shipping name: Not regulated
  • Transport hazard class(es): Not regulated
  • Packing group: Not regulated
  • Environmental hazards: No

IMDG

  • UN number: Not regulated
  • UN proper shipping name: Not regulated
  • Transport hazard class(es): Not regulated
  • Packing group: Not regulated
  • Environmental hazards: No

15. Regulatory Information

US federal regulations:

  • Toxic Substances Control Act (TSCA): Not regulated
  • CERCLA Hazardous Substance List (40 CFR 302.4): Not listed
  • SARA 304 Emergency release notification: Not regulated
  • OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053): Not regulated

Superfund Amendments and Reauthorization Act of 1986 (SARA):

  • SARA 302 Extremely hazardous substance: Not listed
  • SARA 311/312 Hazardous chemical: No
  • SARA 313 (TRI reporting): Not regulated

Other federal regulations:

  • Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List: Not regulated
  • Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130): Not regulated
  • Safe Drinking Water Act (SDWA): Not regulated

16. Other Information

HMIS® ratings:

  • Health: 0
  • Flammability: 1
  • Physical hazard: 0

NFPA ratings:

  • Health: 0
  • Flammability: 1
  • Instability: 0

Disclaimer: The information in the sheet was written based on the best knowledge and experience currently available.

Issue date: 07-29-2019

Author: Hangzhou C&K Testing Technic Co.,Ltd

Website: www.cirs-ck.com

Tel: 0571-89900715

Email: test@cirs-group.com



Click here to shop PolySmooth.


    • Related Articles

    • PolySmooth Tech Data Sheet

      Technical Data Sheet Product Identification Product Name PolySmooth Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone ...
    • PolyMax™ PLA Safety Data Sheet

      PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...
    • Polymaker PC-ABS Safety Data Sheet

      Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...
    • PolySonic_PLA Safety Data Sheet

      Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) 1. Product and Company Identification Product Name PolySonic_PLA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn ...
    • PolySonic PLA Pro Safety Data Sheet

      Safety Data Sheet 1. Product and Company Identification Product Name PolySonic PLA Pro Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email ...