PolyMax™ PLA Safety Data Sheet
PolyMax™ PLA Safety Data Sheet
According to Hazard Communication Standard (29 CFR 1910.1200)
Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036
Product Name |
PolyMax™ PLA |
Product Use |
3D Printing Filament |
Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
Address |
2901 Auburn Rd, Auburn Hills, MI 48326 |
Contact Email |
info@rev1tech.com |
Telephone |
+248-707-2950 |
Emergency Telephone Number |
+248-707-2950 |
- GHS Classification
- Physical hazards: Not classified
- Health hazards: Not classified
- Environmental hazards: Not classified
- GHS Label Elements
- Hazard Pictograms: No hazard pictogram is used.
- Signal word: No signal word is used.
- Hazard statement: Not applicable.
- Precautionary Statement
- Prevention: Not applicable.
- Response: Not applicable.
- Storage: Not applicable.
- Disposal: Not applicable.
- Other hazards: Not available.
This product does not contain hazardous ingredients above cut-off value according to HCS2012.
- Eye contact: None expected to require first aid measures. Flush with running water for at least 15 minutes. If irritation persists, get medical attention.
- Skin contact: None expected to require first aid measures. Wash thoroughly with soap and water. Get medical attention in the unlikely event that irritation persists.
- Inhalation: None expected to require first aid measures. If breathed in, remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical attention.
- Ingestion: Immediate first aid is not likely to be required. A physician or poison control center can be contacted for advice.
- Flammable properties: Not available.
- Extinguishing media:
- Suitable extinguishing media: Water spray, alcohol-resistant foam, dry powder, or carbon dioxide.
- Unsuitable extinguishing media: Avoid using DC water to extinguish fire, to avoid material splashes and fire spread.
- Firefighting equipment/instructions: Wear self-contained breathing apparatus for firefighting if necessary.
- Hazardous combustion products: Carbon oxides.
- Personal precautions: Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas.
- Environmental precautions: Avoid disposing into drainage/sewer system or directly into the aquatic environment.
- Methods for cleaning up: Sweep up and shovel into suitable containers. Clean up affected area.
- Handling: Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.
- Storage: Store in a cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
- Occupational exposure limits: This product has no PEL, TLV, or other recommended exposure limit.
- Biological limit values: No biological exposure limits noted for the ingredient(s).
- Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of the workday.
- Individual protection measures, such as personal protective equipment:
- Eye / face protection: No special protection required.
- Skin protection: No special protection required.
- Respiratory protection: No special protection required.
- General hygiene considerations: Wash hands, forearms, and face thoroughly after handling chemical products, before eating, smoking, and using the lavatory, and at the end of the working period.
Appearance |
Physical state: Solid |
Form |
Solid |
Color |
White color |
Odor |
Not available |
pH |
Not available |
Melting point/Freezing point |
175°C |
Solubility (water) |
Insoluble |
Relative Density |
1.2 |
- Reactivity: The substance is stable under normal storage and handling conditions.
- Chemical stability: Material is stable under normal conditions.
- Conditions to avoid: Incompatible materials.
- Incompatible materials: Strong oxidizing agents.
- Hazardous decomposition products: Carbon oxides.
- Possibility of hazardous reactions: No hazardous reactions known.
- Toxicokinetics, metabolism, and distribution: Not available
- Information on toxicological effects:
- Acute toxicity: Not available
- Skin corrosion/Irritation: Not classified
- Serious eye damage/irritation: Not classified
- Respiratory or skin sensitization: Not classified
- Germ cell mutagenicity: Not classified
- Carcinogenicity: Not classified
- Reproductive toxicity: Not classified
- STOT- single exposure: Not classified
- STOT-repeated exposure: Not classified
- Aspiration hazard: Not classified
- Toxicity:
- LC50 N/A 96h Fish OECD 203 N/A N/A
- EC50 N/A 48h Daphnia OECD 202 N/A N/A
- EC50 N/A 72h Algae OECD 201 N/A N/A
- Persistence and degradability: Not available.
- Bioaccumulative potential: Not available.
- Mobility in soil: Not available.
- Results of PBT & vPvB assessment: Not available.
- Other adverse effects: Not available.
- Disposal instructions: Dispose of contents/container in accordance with local/regional/national/international regulations.
- Contaminated packaging: Since emptied containers may retain product residue, follow label warnings even after container is emptied.
- DOT
- Basic shipping requirements:
- UN number: Not regulated
- Proper shipping name: Not regulated
- Hazard class: Not regulated
- Packing group: Not regulated
- Environmental hazards: No
- IATA
- UN number: Not regulated
- UN proper shipping name: Not regulated
- Transport hazard class(es): Not regulated
- Packing group: Not regulated
- Environmental hazards: No
- IMDG
- UN number: Not regulated
- UN proper shipping name: Not regulated
- Transport hazard class(es): Not regulated
- Packing group: Not regulated
- Environmental hazards: No
- US federal regulations
- Toxic Substances Control Act (TSCA) Section 12(b) Export Notification (40 CFR 707, Subpt. D): Not regulated.
- CERCLA Hazardous Substance List (40 CFR 302.4): Not listed.
- SARA 304 Emergency release notification: Not regulated.
- OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053): Not regulated.
- Superfund Amendments and Reauthorization Act of 1986 (SARA)
- SARA 302 Extremely hazardous substance: Not listed.
- SARA 311/312 Hazardous chemical: No
- SARA 313 (TRI reporting): Not regulated.
- Other federal regulations
- Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List: Not regulated.
- Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130): Not regulated.
- Safe Drinking Water Act (SDWA): Not regulated.
- HMIS® ratings: Health: 0, Flammability: 1, Physical hazard: 0
- NFPA ratings: Health: 0, Flammability: 1, Instability: 0
- Disclaimer: The information in the sheet was written based on the best knowledge and experience currently available.
- Issue date: 07-29-2019
- Author: Hangzhou C&K Testing Technic Co.,Ltd
- Website: www.rev1tech.com
- Tel: 0571-89900715
- Email: test@cirs-group.com
Click here to shop PolyMax™ PLA.
Related Articles
Polymaker PC-ABS Safety Data Sheet
Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...
PolyLite LW-PLA Safety Data Sheet
Safety Data Sheet Product Identification Product Name PolyLite LW-PLA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone ...
PolySonic PLA Pro Safety Data Sheet
Safety Data Sheet 1. Product and Company Identification Product Name PolySonic PLA Pro Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email ...
PolyLite™ PLA-CF Safety Data Sheet
PolyLite PLA-CF Safety Data Sheet Product and Company Identification Product Name PolyLite PLA-CF Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email ...
PolyMax-PLA Technical Data Sheet
PolyMax-PLA Technical Data Sheet Product Identification Product Name PolyMax-PLA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com ...