"PolySmooth™ 3D Printing Filament: Technical Data Sheet by Rev1Tech"

PolySmooth Tech Data Sheet

Technical Data Sheet

Product Identification

Product Name PolySmooth
Product Use 3D Printing Filament
Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd.
Address 2901 Auburn Rd, Auburn Hills, MI 48326
Contact Email info@rev1tech.com
Telephone +248-707-2950
Emergency Telephone Number +248-707-2950

General Description

PolySmooth™ is a unique, easy-to-print filament designed for hands-free post-processing. The surface can be smoothed with alcohol to achieve layer-free models using the Polysher™.

Properties

Property Test Method Value
Density ISO1183, GB/T1033 1.10 g/cm³ at 23°C
Melt Index 210°C, 2.16kg 6.7 g/10min
Equilibrium Water Absorption 2.36%
Glass Transition Temperature DSC, 10°C/min 70 °C
Decomposition Temperature TGA, 20°C/min 260 °C
Vicat Softening Temperature ISO 306, GB/T 1633 70 °C

Chemical Resistance

  • Effect of weak acids: Not resistant
  • Effect of strong acids: Not resistant
  • Effect of weak alkalis: Not resistant
  • Effect of strong alkalis: Not resistant
  • Effect of organic solvent: No data available
  • Effect of oils and grease: No data available

Mechanical Properties

Property Test Method X-Y Direction Z Direction
Young’s Modulus ISO 527, GB/T 1040 2092 ± 652 MPa 1614 ± 79 MPa
Tensile Strength ISO 527, GB/T 1040 44.1 ± 0.8 MPa 18.4 ± 1.2 MPa
Elongation at Break ISO 527, GB/T 1040 3.4 ± 0.4% 1.3 ± 0.1%
Bending Modulus ISO 178, GB/T 9341 2062 ± 200 MPa N/A
Bending Strength ISO 178, GB/T 9341 76.2 ± 5.7 MPa N/A
Charpy Impact Strength ISO 179, GB/T 1043 9.2 ± 0.7 kJ/m² N/A

Printing Guidelines

  • Nozzle Temperature: 190 – 220 °C
  • Build Surface Material: BuildTak®, Glass, Blue Tape
  • Build Surface Treatment: Glue
  • Build Plate Temperature: 25 - 70 °C
  • Cooling Fan: ON
  • Printing Speed: 40-60 mm/s
  • Raft Separation Distance: 0.2 mm
  • Retraction Distance: 1 mm
  • Retraction Speed: 20 mm/s
  • Environmental Temperature: Room temperature
  • Threshold Overhang Angle: 60°
  • Recommended Support Material: PolyDissolve™ S1

Disclaimer

The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.

Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Rev1Tech materials for the intended application. Rev1Tech makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Rev1Tech shall not be made liable for any damage, injury, or loss induced from the use of Rev1Tech materials in any application.



Click here to shop PolySmooth.