PolyCast™ Safety Data Sheet - Comprehensive Safety Information for 3D Printing Filament

PolyCast™ Safety Data Sheet

According to Hazard Communication Standard (29 CFR 1910.1200)

Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019

1. Identification

Product Name PolyCast™
Product Use 3D Printing Filament
Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd.
Address Building 6&7&11, No.2, Hai Cheng Road, Chang Shu Economic & Technological Development Zone, 215513, People’s Republic of China
Contact Email zhenggang.cai@polymaker.com
Telephone +86-512-52058005
Emergency Telephone Number +86-512-52058005

2. Hazard(s) Identification

GHS Classification No classification
GHS Label Elements No hazard pictogram is used.
Signal Word None
Hazard Statement Not applicable.
Precautionary Statement Not applicable.

3. Composition / Information on Ingredients

This product does not contain hazardous ingredients above cut-off value according to HCS2012.

4. First-aid Measures

Eye Contact Flush with running water for at least 15 minutes. If irritation persists, get medical attention.
Skin Contact Wash thoroughly with soap and water. Get medical attention if irritation persists.
Inhalation If breathed in, remove victim to fresh air and keep at rest in a comfortable position for breathing. Seek medical attention if unwell.
Ingestion Immediate first aid is not likely required. Contact a physician or poison control center for advice.

5. Fire-fighting Measures

Suitable Extinguishing Media Use water spray, alcohol-resistant foam, dry powder, or carbon dioxide.
Unsuitable Extinguishing Media Avoid using DC water to extinguish fire, to avoid material splashes and fire spread.
Hazardous Combustion Products Carbon oxides, nitrogen oxides.

6. Accidental Release Measures

Personal Precautions Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas.
Environmental Precautions Avoid disposing into drainage/sewer system or directly into the aquatic environment.
Methods for Cleaning Up Sweep up and shovel into suitable containers. Clean up affected area.

7. Handling and Storage

Handling Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.
Storage Store in a cool place. Keep container tightly closed in a dry and well-ventilated place.

8. Exposure Controls / Personal Protection

Occupational Exposure Limits No exposure limits noted for the ingredient(s).
Engineering Controls Use in a well-ventilated area.
Personal Protective Equipment
  • Eye/Face Protection: Chemical safety goggles.
  • Skin Protection: Wear suitable protective clothing to prevent skin exposure.
  • Respiratory Protection: Suitable respiratory protective device recommended.

9. Physical and Chemical Properties

Appearance Solid
Color Translucent
Odor Odorless
Density 1.08-1.10
Solubility (water) Insoluble

10. Stability and Reactivity

Chemical Stability Stable under normal conditions.
Incompatible Materials Avoid contact with other chemicals, oxidizing agents, strong alkalis, and strong acids.
Hazardous Decomposition Products Carbon oxides, nitrogen oxides.

11. Toxicological Information

Acute Toxicity Not classified.
Skin Corrosion/Irritation Not classified.
Serious Eye Damage/Irritation Not classified.
Respiratory or Skin Sensitization Not classified.
Germ Cell Mutagenicity Not classified.
Carcinogenicity Not classified.
Reproductive Toxicity Not classified.

12. Ecological Information

Toxicity No known significant effects or critical hazards.

    • Related Articles

    • PolyCast™ Technical Data Sheet

      PolyCast™ Technical Data Sheet Identification Product Name PolyCast™ Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone ...

    • Polymaker PC-ABS Safety Data Sheet

      Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...

    • PolyMax™ PLA Safety Data Sheet

      PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...

    • PolyMide™ CoPA Safety Data Sheet

      PolyMide CoPA Safety Data Sheet 1. Identification Product Name PolyMide_CoPA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com ...

    • PolyLite™ PETG Safety Data Sheet

      Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) 1. Product and Company Identification Product Name PolyLite™ PETG Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 ...