PolyLite™ PETG Safety Data Sheet
Safety Data Sheet
According to Hazard Communication Standard (29 CFR 1910.1200)
1. Product and Company Identification
Product Name |
PolyLite™ PETG |
Product Use |
3D Printing Filament |
Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
Address |
2901 Auburn Rd, Auburn Hills, MI 48326 |
Contact Email |
info@rev1tech.com |
Telephone |
+248-707-2950 |
Emergency Telephone Number |
+248-707-2950 |
2. Hazards Identification
- GHS Classification:
- Physical hazards: Not classified
- Health hazards: Not classified
- Environmental hazards: Not classified
- GHS Label Elements: No hazard pictogram is used.
- Signal Word: No signal word is used.
- Hazard Statement: Not applicable.
Precautionary Statement:
- Prevention: Not applicable.
- Response: Not applicable.
- Storage: Not applicable.
- Disposal: Not applicable.
This product does not contain hazardous ingredients above the cut-off value according to HCS2012.
4. First Aid Measures
- Eye contact: None expected to require first aid measures. Flush with running water for at least 15 minutes. If irritation persists get medical attention.
- Skin contact: None expected to require first aid measures. Wash thoroughly with soap and water. Get medical attention in the unlikely event that irritation persists.
- Inhalation: None expected to require first aid measures. If breathed in, remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical attention.
- Ingestion: Immediate first aid is not likely to be required. A physician or poison control center can be contacted for advice.
- Notes to Physician: Treat symptoms.
5. Fire Fighting Measures
- Flammable Properties: Not available.
Extinguishing Media:
- Suitable extinguishing media: Water spray, alcohol-resistant foam, dry powder, or carbon dioxide.
- Unsuitable extinguishing media: Avoid using DC water to extinguish fire, so as to avoid material splashes and fire spread.
- Firefighting Equipment/Instructions: Wear self-contained breathing apparatus for firefighting if necessary.
- Hazardous Combustion Products: Carbon oxides.
6. Accidental Release Measures
- Personal Precautions: Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas.
- Environmental Precautions: Avoid disposing into drainage/sewer system or directly into the aquatic environment.
- Methods for Cleaning Up: Sweep up and shovel into suitable containers. Clean up affected area.
7. Handling and Storage
- Handling: Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.
- Storage: Store in a cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
8. Exposure Controls / Personal Protection
9. Physical & Chemical Properties
Physical State |
Solid |
Form |
Solid |
Color |
Transparent |
Odor |
Odorless |
Melting Point/Freezing Point |
220°C |
Solubility (Water) |
Insoluble |
Relative Density |
1.2 |
- Reactivity: The substance is stable under normal storage and handling conditions.
- Chemical Stability: Material is stable under normal conditions.
- Conditions to Avoid: Incompatible materials.
- Incompatible Materials: Strong oxidizing agents.
- Hazardous Decomposition Products: Carbon oxides.
Toxicokinetics, Metabolism and Distribution: Not available
Information on Toxicological Effects:
- Acute Toxicity: Not available
- Skin Corrosion/Irritation: Not classified
- Serious Eye Damage/Irritation: Not classified
- Respiratory or Skin Sensitization: Not classified
- Germ Cell Mutagenicity: Not classified
- Carcinogenicity: Not classified
- Reproductive Toxicity: Not classified
- STOT-single Exposure: Not classified
- STOT-repeated Exposure: Not classified
- Aspiration Hazard: Not classified
- Toxicity: Not available
- Persistence and Degradability: Not available
- Bioaccumulative Potential: Not available
- Mobility in Soil: Not available
- Other Adverse Effects: Not available
13. Disposal Considerations
- Disposal Instructions: Dispose of contents/container in accordance with local/regional/national/international regulations.
- Contaminated Packaging: Since emptied containers may retain product residue, follow label warnings even after the container is emptied.
DOT |
- UN Number: Not regulated
- Proper Shipping Name: Not regulated
- Hazard Class: Not regulated
- Packing Group: Not regulated
- Environmental Hazards: No
|
IATA |
- UN Number: Not regulated
- UN Proper Shipping Name: Not regulated
- Transport Hazard Class(es): Not regulated
- Packing Group: Not regulated
- Environmental Hazards: No
|
IMDG |
- UN Number: Not regulated
- UN Proper Shipping Name: Not regulated
- Transport Hazard Class(es): Not regulated
- Packing Group: Not regulated
- Environmental Hazards: No
|
- HMIS® Ratings: Health: 0, Flammability: 1, Physical hazard: 0
- NFPA Ratings: Health: 0, Flammability: 1, Instability: 0
Disclaimer: The information in this sheet was written based on the best knowledge and experience currently available.
Issue Date: 07-29-2019
Author: Hangzhou C&K Testing Technic Co., Ltd
Website: www.rev1tech.com
Related Articles
Polymaker PC-ABS Safety Data Sheet
Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...
Polylite ABS Tech data sheet
Product Technical Data Sheet Identification Product Name: Polylite ABS Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...
PolyLite PC Safety Data Sheet
Safety Data Sheet PolyLite PC Version: 1.0 Issue Date: 07/29/2019 Revision Date: 07/29/2019 1. Product and Company Identification Product Name: PolyLite PC Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. ...
PolyMax™ PLA Safety Data Sheet
PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...
PolyLite™ PLA-CF Safety Data Sheet
PolyLite PLA-CF Safety Data Sheet Product and Company Identification Product Name PolyLite PLA-CF Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email ...