PolyMide™ CoPA Safety Data Sheet
PolyMide CoPA Safety Data Sheet
1. Identification
Product Name |
PolyMide_CoPA |
Product Use |
3D Printing Filament |
Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
Address |
2901 Auburn Rd, Auburn Hills, MI 48326 |
Contact Email |
info@rev1tech.com |
Telephone |
+248-707-2950 |
Emergency Telephone Number |
+248-707-2950 |
2. Hazards Identification
- GHS Classification: Not classified for physical, health, or environmental hazards.
- GHS Label Elements: No hazard pictogram is used.
- Signal Word: No signal word is used.
- Hazard Statement: Not applicable.
- Precautionary Statement: Not applicable for prevention, response, storage, or disposal.
- Other Hazards: Not available.
Components |
CAS# |
Percent |
Calcium chloride |
10043-52-4 |
>0.5% |
4. First Aid Measures
- Eye Contact: Flush with running water for at least 15 minutes. If irritation persists, get medical attention.
- Skin Contact: Wash thoroughly with soap and water. Get medical attention if irritation persists.
- Inhalation: Move to fresh air and rest comfortably. Seek medical attention if unwell.
- Ingestion: Contact a physician or poison control center for advice.
- Notes to Physician: Treat symptoms.
5. Fire Fighting Measures
- Flammable Properties: Not available.
- Extinguishing Media: Use extinguishers suitable for surrounding fire.
- Firefighting Instructions: Wear self-contained breathing apparatus if necessary.
- Hazardous Combustion Products: Carbon oxides.
6. Accidental Release Measures
- Personal Precautions: Use personal protective equipment and ensure adequate ventilation.
- Environmental Precautions: Avoid release into drainage systems.
- Methods for Cleaning Up: Sweep up and shovel into suitable containers.
7. Handling and Storage
- Handling: Ensure good ventilation. Wash thoroughly after handling.
- Storage: Store in a cool, dry, well-ventilated place. Keep containers tightly closed.
8. Exposure Controls / Personal Protection
- Occupational Exposure Limits: No limits established.
- Engineering Controls: Handle with good industrial hygiene practices.
- Personal Protection: No special protection required under normal conditions.
9. Physical & Chemical Properties
Appearance |
Solid, Beige |
Melting Point |
190°C |
Solubility (Water) |
Insoluble |
Relative Density |
1.10 |
- Chemical Stability: Stable under normal conditions.
- Incompatible Materials: Strong oxidizing agents.
- Hazardous Decomposition Products: Carbon oxides.
- Acute Toxicity: Calcium chloride (CAS#10043-52-4) - Oral LD50 (Rat): 2301 mg/kg
- Skin Corrosion/Irritation: Not classified
- Serious Eye Damage/Irritation: Not classified
- Respiratory or Skin Sensitization: Not classified
- Carcinogenicity: Not classified
- Ecotoxicity: Calcium chloride (CAS#10043-52-4) - LC50 (Fish, 96h): N/A
- Persistence and Degradability: Not available.
- Bioaccumulative Potential: Not available.
13. Disposal Considerations
- Disposal Instructions: Dispose in accordance with local regulations.
- UN Number: Not regulated
- Proper Shipping Name: Not regulated
- Hazard Class: Not regulated
- US Federal Regulations: Not regulated under CERCLA, SARA, CAA, or SDWA.
- HMIS® Ratings: Health: 0, Flammability: 1, Physical Hazard: 0
- NFPA Ratings: Health: 0, Flammability: 1, Instability: 0
- Disclaimer: Information provided based on current knowledge and experience.
Click here to shop PolyMide_CoPA.
Related Articles
PolyMide CoPA Technical Data Sheet
PolyMide CoPA Technical Data Sheet Identification Product Name PolyMide_CoPA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com ...
PolyMide PA12-CF Safety Data Sheet
PolyMide PA12-CF Safety Data Sheet 1. Identification Product Name PolyMide_PA12-CF Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com ...
PolyMide PA6 GF Safety Data Sheet
PolyMide PA6 GF Safety Data Sheet Product Name: PolyMide_PA6_GF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...
Polymaker PC-ABS Safety Data Sheet
Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...
PolyMax™ PLA Safety Data Sheet
PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...