"Rev1Tech CarbonX™ Carbon Fiber ezPC Polycarbonate 3D Printing Filament - Technical Data Sheet"

CarbonX ezPC+CF Technical Data Sheet

Technical Data Sheet

CarbonX™ Carbon Fiber ezPC Polycarbonate 3D Printing Filament

Physical Properties Standard Unit Typical Value
Density ISO 1183 g/cc 1.36
Mechanical Properties Standard Unit  Typical Value
Tensile Strength, Break ISO 527 MPa       73
Tensile Modulus ISO 527 MPa 6980
Tensile Elongation, Break ISO 527 % 2.1
Flexural Strength ISO 178 MPa 85
Flexural Modulus ISO 178 MPa 6540
Thermal Properties Standard Unit Typical Value
Glass Transition Temperature (Tg) DSC °C 127
Deflection Temperature at 0.45 MPa (66psi) ISO 75 °C 119
Electrical Property Standard Unit Typical Value
Surface Resistance ASTM D257 Ohm/sq >109

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specification limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.

Visit our website for more information: www.Rev1Tech.com



Click here to shop CarbonX ezPC+CF.



    • Related Articles

    • CarbonX ezPC+CF SAFETY DATA SHEET

      SAFETY DATA SHEET Product Identification Product Name: CarbonX ezPC+CF Product Use: 3D Printing Filament Manufacturer/Supplier: Rev1Tech Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: +248-707-2950 ...

    • Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament

      Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament TDS Rev 3.0 Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.07 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 45 ...

    • PolyMax-PETG Technical Data Sheet

      PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...

    • PolyMide_PA12-CF Technical Data Sheet

      Product Technical Data Sheet Product Name: PolyMide_PA12-CF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...

    • PolySonic™ PLA Technical Data Sheet

      PolySonic™ PLA Technical Data Sheet Product Name: PolySonic_PLA Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...