Product Name: PolyMide_PA12-CF
Product Use: 3D Printing Filament
Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd.
Address: 2901 Auburn Rd, Auburn Hills, MI 48326
Contact Email: info@rev1tech.com
Telephone: +248-707-2950
Emergency Telephone Number: +248-707-2950
PolyMide™ PA12-CF is a carbon fiber reinforced PA12 (Nylon 12) filament. Thanks to the low moisture sensitivity of PA12, this product features outstanding mechanical and thermal properties even after the moisture conditioning process. Combined with its ease of print with Warp-Free™ technology, this product is ideal to create manufacturing tools.
PolyMide™ PA12-CF absorbs moisture slowly over time. The estimated equilibrium water absorption is around 1.5%.
| Property | Test Method | Value |
|---|---|---|
| Density | ISO1183, GB/T1033 | 1.06 g/cm³ at 23°C |
| Melt index | 280°C, 2.16 kg | 25 g/10min |
| Effect of weak acids | Not resistant | |
| Effect of strong acids | Not resistant | |
| Effect of weak alkalis | Slightly resistant | |
| Effect of strong alkalis | Not resistant | |
| Effect of organic solvent | Not resistant | |
| Effect of oils and grease | Resistant | |
| Estimated equilibrium water absorption | ~1.5% |
| Property | Test Method | Value |
|---|---|---|
| Glass transition temperature | DSC, 10°C/min | 54°C |
| Melting temperature | DSC, 10°C/min | 165°C |
| Crystallization temperature | DSC, 10°C/min | 130°C |
| Heat deflection temperature (1.8 MPa) | ISO 75 | 105°C |
| Heat deflection temperature (0.45 MPa) | ISO 75 | 131°C |
| Property | Test Method | X-Y | Z |
|---|---|---|---|
| Young’s modulus | ISO 527, GB/T 1040 | 3304.39 ± 145 MPa | 1801.09 ± 80 MPa |
| Tensile strength | ISO 527, GB/T 1040 | 71.6 ± 1.7 MPa | 43.3 ± 3.3 MPa |
| Elongation at break | ISO 527, GB/T 1040 | 3.57 ± 0.3 % | 3.29 ± 0.5% |
| Bending modulus | ISO 178, GB/T 9341 | 3535 ± 239 MPa | N/A |
| Bending strength | ISO 178, GB/T 9341 | 109.9 ± 1.4 MPa | N/A |
| Charpy impact strength | ISO 179, GB/T 1043 | 12.5 ± 0.7 kJ/m² | N/A |
| Parameter | Value |
|---|---|
| Nozzle temperature | 260 – 300 (℃) |
| Build surface material | BuildTak®, Glass, Blue Tape |
| Build surface treatment | PVP Glue |
| Build plate temperature | 25 - 50 (˚C) |
| Cooling fan | OFF |
| Printing speed | 30-60 (mm/s) |
| Raft separation distance | 0.2 (mm) |
| Retraction distance | 3 (mm) |
| Retraction speed | 40 (mm/s) |
| Environmental temperature | Room temperature |
| Threshold overhang angle | 60 (˚) |
The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.
Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of materials for the intended application. Rev1Tech makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Rev1Tech shall not be made liable for any damage, injury, or loss induced from the use of materials in any application.
Click here to shop PolyMide_PA12-CF.