"PolySonic™ PLA: High-Speed 3D Printing Filament Specifications | Rev1Tech"

PolySonic™ PLA Technical Data Sheet

PolySonic™ PLA Technical Data Sheet

Product Name:    PolySonic_PLA
Product Use:       3D Printing Filament
Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd.
Address:              2901 Auburn Rd, Auburn Hills, MI 48326
Contact Email:    info@rev1tech.com
Telephone:           +248-707-2950
Emergency Telephone Number: +248-707-2950

Product Description

PolySonic™ PLA is a revolutionary high-speed 3D printing filament, the ultimate game-changer in additive manufacturing. With its lightning-fast extrusion rate, cutting-edge precision, and exceptional layer adhesion, you can ramp up the speed of your 3D printer and witness new levels of productivity. Accelerate your workflow without compromising on strength or quality.

Physical Properties

Property Method Typical Value
Density ISO1183, GB/T1033 1.23 g/cm3 at 21.5°C
Melt index 210°C, 2.16 kg 15.4 g/10min
Equilibrium water absorption 0.40%
Glass transition temperature DSC, 10°C/min 59 °C
Melting temperature DSC, 10°C/min 164 °C
Crystallization temperature DSC, 10°C/min 96 °C
Decomposition temperature TGA, 20°C/min 370 °C
Vicat softening temperature ISO 306, GB/T 1633 61 °C
Heat deflection temperature ISO 75 1.8MPa 52 °C

Mechanical Properties

Property Method Typical Value
Young’s modulus (X-Y) ISO 527, GB/T 1040 2878.3 ± 74.3 MPa
Tensile strength (X-Y) ISO 527, GB/T 1040 46.0 ± 0.5 MPa
Elongation at break (X-Y) ISO 527, GB/T 1040 21.5 ± 5.02%
Bending modulus (X-Y) ISO 178, GB/T 9341 2868.2 ± 78.4 MPa
Bending strength (X-Y) ISO 178, GB/T 9341 76.5 ± 0.9 MPa

Chemical Resistance

  • Effect of weak acids: Not resistant
  • Effect of strong acids: Not resistant
  • Effect of weak alkalis: Not resistant
  • Effect of strong alkalis: Not resistant
  • Effect of organic solvent: No data available
  • Effect of oils and grease: No data available

Printing Guidelines

  • Nozzle temperature: Classic 190-210°C, High-speed 210-230°C
  • Build surface treatment: Glue when needed
  • Build plate temperature: 30 - 60°C
  • Cooling fan: 100%
  • Printing speed: Classic 50-100mm/s, High-speed 100-300mm/s
  • Retraction distance: 0.5 - 3 mm
  • Retraction speed: 30 - 60 mm/s
  • Closure Chamber: No needed
  • Recommended support material: PolySupport™ and PolyDissolve™ S1
  • Drying setting: 55°C for 6h

Notes

The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.

Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of materials for the intended application. Rev1Tech makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Rev1Tech shall not be made liable for any damage, injury, or loss induced from the use of materials in any application.





Click here to shop PolySonic PLA.