"Rev1Tech SimuBone™ Bone Simulation Filament - Technical Data Sheet"

SimuBone™ Technical Data Sheet

Technical Data Sheet

SimuBone™ Bone Simulation Filament

Physical Properties      Standard       Unit      Typical Value
Density     ISO 1183      g/cc          1.34
Mechanical Properties       .    Standard       Unit       Typical Value
Tensile Strength, Break        ISO 527      MPa          65
Tensile Modulus        ISO 527 .    MPa         3410
Tensile Elongation, Break        ISO 527       %           4
Flexural Strength .    ISO 178     MPa         122
Flexural Modulus       ISO 178     MPa .        3355
Thermal Properties         Standard        Unit       Typical Value
Glass Transition Temperature (Tg)       DSC       °C            55
Deflection Temperature at 0.45 MPa (66psi)      ISO 75       °C             89
Certifications     Efficacy Rate
Certified Antibacterial           99.9%

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specification limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.

Printed Specimen Conditions

  • Printer: Open Source FDM/FFF
  • Nozzle: 0.4mm
  • Layer Height: 0.25mm
  • Infill: 100%, +/- 45°
  • Extrusion Temp: 230°C
  • Bed Temp: 23°C
  • Specimen Orientation: XY Flat

Visit our website for more information: www.Rev1Tech.com


Click here to shop SimuBone Bone Modeling Filament.

    • Related Articles

    • Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament

      Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament TDS Rev 3.0 Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.07 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 45 ...

    • PolySonic™ PLA Technical Data Sheet

      PolySonic™ PLA Technical Data Sheet Product Name: PolySonic_PLA Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...

    • PolyMax-PETG Technical Data Sheet

      PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...

    • PolyMide_PA12-CF Technical Data Sheet

      Product Technical Data Sheet Product Name: PolyMide_PA12-CF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...

    • FibreX™ PP+GF30 3D Printing Filament Technical Data Sheet

      Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.12 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 65 Tensile Modulus ISO 527 MPa 6750 Tensile Elongation, Break ISO 527 % ...