"PSU 3D Printing Filament Safety Data Sheet | Rev1Tech"

ThermaX™ PSU SAFETY DATA SHEET

SAFETY DATA SHEET

Firewire® Polysulfone (PSU)

Product Name:      PSU
Product Use:        3D Printing Filament
Manufacturer/Supplier: Rev1Tech
Address:              904 36th Street, Suite B, Grand Rapids MI 49500 USA
Contact Email:    info@rev1tech.com
Telephone:          +248-707-2950
Emergency Telephone Number: +248-707-2950

1. PRODUCT AND SUPPLIER INFORMATION

Product Identification
  • Product Name: Firewire® Polysulfone
  • Chemical Name: Polysulfone (PSU)
  • Recommended Use: Additive manufacturing
Supplier Information
  • Address: 904 36th Street, Suite B, Grand Rapids MI 49500 USA
  • Phone: (248) 707-2950
  • Email: info@rev1tech.com

2. HAZARDS IDENTIFICATION

Regulation (EC) NO 1272/2008: Not classified as a dangerous product

  • Physical Hazards: None
  • OSHA Regulatory Status: This product is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)

3. COMPOSITION/INFORMATION ON INGREDIENTS

Components CAS No. Concentration Range (%)
Phenol, 4,4`-(1-methylethylidene)bis-, polymer with 1,1`-sulfonylbis[4-chlorobenzene] 25154-01-2 100

4. EMERGENCY FIRST AID

  • Eyes: Flush with water. Consult physician if symptoms persist.
  • Skin Contact: Wash with soap and water. For thermal burns from molten polymer, immediately flush with cold water. Do not attempt to remove cooled polymer from skin. Obtain medical attention.
  • Inhalation: Leave exposed area and seek fresh air. If irritation persists seek medical attention.
  • Ingestion: Not likely due to nature of product. If ingested, drink plenty of water. Do not induce vomiting. Consult a physician if symptoms persist.

5. FIRE AND EXPLOSION HAZARD

  • Extinguishing Media: Water spray, dry powder, and foam. Carbon dioxide (CO2).
  • Safety Precautions for Persons exposed to products of combustion should wear NIOSH approved self-contained breathing apparatus and full protective equipment.


    Click here to shop ThermaX™ PSU.

    • Related Articles

    • PolySonic_PLA Safety Data Sheet

      Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) 1. Product and Company Identification Product Name PolySonic_PLA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn ...

    • PolyMax™ PLA Safety Data Sheet

      PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...

    • PolySmooth Safety Data Sheet

      Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) 1. Identification Product Name: PolySmooth Product Use: 3d Printing filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, ...

    • ThermaX™ PSU Technical Data Sheet

      Technical Data Sheet: ThermaX™ PSU 3D Printing Filament Physical Properties Property Standard Unit Metric Density ISO 1183 g/cc 1.24 Mechanical Properties Property Standard Unit Metric Tensile Strength ISO 527 MPa 52 Tensile Modulus ISO 527 MPa 2100 ...

    • SAFETY DATA SHEET Obsidian™ PA6+CF 3D Printing Filament

      SAFETY DATA SHEET Obsidian™ PA6+CF 3D Printing Filament EFFECTIVE DATE: 08 / 01 / 2022 REVISION NUMBER: V1.1 1 PRODUCT AND SUPPLIER INFORMATION Product Identification: Product Name: Obsidian™ PA6+Carbon Fiber (CF) Chemical Name: Polyamide (PA) ...