CarbonX™ CF15 PEKK-A Technical Data Sheet
Technical Data Sheet
CarbonX™ CF15 PEKK-A 3D Printing Filament
TDS Rev 2
| Physical Properties |
| Standard |
Unit |
Typical Value |
| Density |
ISO 1183 |
g/cc 1.39 |
| Mechanical Properties |
| Standard |
Unit |
Typical Value |
| Tensile Strength, Break |
ISO 527 |
MPa 110 |
| Tensile Modulus |
ISO 527 |
MPa 8465 |
| Tensile Elongation, Break |
ISO 527 |
% 2.5 |
| Flexural Strength |
ISO 178 |
MPa 142 |
| Flexural Modulus |
ISO 178 |
MPa 8542 |
| Thermal Properties |
| Standard |
Unit |
Typical Value |
| Glass Transition Temperature (Tg) |
DSC |
°C 165 |
| Melt Temperature (Tm) |
DSC |
°C 305 |
| Deflection Temperature at 0.45 MPa (66psi) |
ISO 75 |
°C 275 |
| Electrical Property |
| Standard |
Unit |
Typical Value |
| Surface Resistance |
ASTM D257 |
Ohm/sq >108 |
Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.
- Nozzle: 0.4mm or Larger [Hardened Nozzle]
- Layer Height: 0.25mm [60% of Nozzle Diameter is Ideal]
- Extrusion Multiplier: 0.95-1.0
- Extrusion Temp: 385-400°C
- Print Bed Temp: 120-160°C
- Enclosed Chamber Temp: up to 165°C Ideal
- Drying Recommendations: 140°C for 4-6 hours
Related Articles
PolyMax-PETG Technical Data Sheet
PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...
PolyMide_PA12-CF Technical Data Sheet
Product Technical Data Sheet Product Name: PolyMide_PA12-CF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...
Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament
Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament TDS Rev 3.0 Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.07 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 45 ...
CarbonX ezPC+CF Technical Data Sheet
Technical Data Sheet CarbonX™ Carbon Fiber ezPC Polycarbonate 3D Printing Filament Physical Properties Standard Unit Typical Value Density ISO 1183 g/cc 1.36 Mechanical Properties Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 73 ...
PolyMide PA6-CF Technical Data Sheet
PolyMide PA6-CF Technical Data Sheet Identification Product Name PolyMide_PA6-CF Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com ...