"Nylon GF30 Technical Data Sheet - High-Performance 3D Printing Filament | Rev1Tech"

FibreX™ PA6-GF30 Technical Data Sheet

Technical Data Sheet

AmideX™ PA6-GF30 Glass Fiber Nylon 3D Printing Filament

Physical Properties

Property Standard Unit Typical Value
Density ISO 1183 g/cc 1.35

Mechanical Properties

Property Standard Unit Typical Value
Tensile Strength, Break ISO 527 MPa 62.8
Tensile Modulus ISO 527 MPa 4261
Tensile Elongation, Break ISO 527 % 6
Flexural Strength ISO 178 MPa 72
Flexural Modulus ISO 178 MPa 3600

Thermal Properties

Property Standard Unit Typical Value
Glass Transition Temperature (Tg) DSC °C 70
Deflection Temperature at 0.45 MPa (66psi) ISO 75 °C 186

Electrical Property

Property Standard Unit Typical Value
Surface Resistance ASTM D257 Ohm/sq >109

Printer: Gearbox™ HT2

Nozzle: 0.4mm | Layer Height: 0.25mm | Infill: 100%, +/- 45°

Extrusion Temp: 265°C | Bed Temp: 70°C | Specimen Orientation: XY Flat

TDS Rev 1.0

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended
to substitute any testing that may be required to determine fitness for any specific use. 

www.Rev1Tech.com

                                                                                  



                 Click here to shop FibreX PA6+GF30.

    • Related Articles

    • FibreX™ PP+GF30 3D Printing Filament Technical Data Sheet

      Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.12 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 65 Tensile Modulus ISO 527 MPa 6750 Tensile Elongation, Break ISO 527 % ...

    • PolyMax-PETG Technical Data Sheet

      PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...

    • Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament

      Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament TDS Rev 3.0 Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.07 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 45 ...

    • PolyMide PA6 GF Technical Data Sheet

      PolyMide PA6 GF Technical Data Sheet Product Name: PolyMide_PA6_GF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...

    • PolySonic™ PLA Technical Data Sheet

      PolySonic™ PLA Technical Data Sheet Product Name: PolySonic_PLA Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...