Safety Data Sheet for 3dxstat ESD_PLA - 3D Printing Filament | Rev1Tech

3dxstat ESD_PLA SAFETY DATA SHEET

SAFETY DATA SHEET

Product Identification

Product Name:       3dxstat ESD_PLA

Product Use:          3D Printing Filament

Manufacturer/Supplier: Rev1Tech

Address:                2901 Auburn Rd, Auburn Hills, MI 48326

Contact Email:       info@rev1tech.com

Telephone:           +248-707-2950

Emergency Telephone Number: +248-707-2950

1. PRODUCT AND SUPPLIER INFORMATION

Product Name: 3dxstat ESD_PLA

Chemical Name: Polylactic Acid Polymer (PLA)

Recommended Use: Additive manufacturing

Supplier Information:

  • Rev1Tech
  • 904 36th Street, Suite B
  • Grand Rapids, MI 49500
  • Phone: +248-707-2950
  • Email: info@rev1tech.com

2. HAZARDS IDENTIFICATION

Regulation (EC) NO 1272/2008: Not classified as a dangerous product

Physical Hazards: None

OSHA Regulatory Status: This product is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)

3. COMPOSITION/INFORMATION ON INGREDIENTS

Components CAS No. Concentration Range (%)
PLA Resin 9051-89-02 >90
Carbon Additives 1333-86-4 <10

4. EMERGENCY FIRST AID

  • Eyes: Flush with water. Consult physician if symptoms persist.
  • Skin Contact: Wash with soap and water. For thermal burns from molten polymer, immediately flush with cold water. Do not attempt to remove cooled polymer from skin. Obtain medical attention.
  • Inhalation: Leave exposed area and seek fresh air. If irritation persists seek medical attention.
  • Ingestion: Not likely due to nature of product. If ingested, drink plenty of water. Do not induce vomiting. Consult a physician if symptoms persist.

5. FIRE AND EXPLOSION HAZARD

  • Extinguishing Media: Water spray, dry powder, and foam. Carbon dioxide (CO2)
  • Safety Precautions: Persons exposed to products of combustion should wear NIOSH approved self-contained breathing apparatus and full protective equipment.

16. MISCELLANEOUS INFORMATION

Prepared by: Business Management

Issued: 08/01/2022

This information set forth herein has been gathered from standard reference materials and/or supplier test data and is, to the best knowledge and belief of Rev1Tech, accurate and reliable. Such information is offered solely for your consideration, investigation and verification, and it is not suggested or guaranteed that the hazard precautions or procedures mentioned are the only ones which exist. Rev1Tech makes no warranties, expressed or implied, with respect to the use of such information or the use of the specific material identified herein in combination with any other material or process, and assumes no responsibility therefore.

END OF SDS


Click here to shop this material.


    • Related Articles

    • PolyMax™ PLA Safety Data Sheet

      PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...

    • PolyLite LW-PLA Safety Data Sheet

      Safety Data Sheet Product Identification Product Name PolyLite LW-PLA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone ...

    • ESD-ABS SAFETY DATA SHEET

      SAFETY DATA SHEET ESD-ABS Effective Date: 08/01/2022 Revision Number: V1.1 1. Product and Supplier Information Product Name ESD-ABS Product Use 3D Printing Filament Manufacturer/Supplier Rev1Tech, 904 36th Street, Suite B, Grand Rapids, MI 49500, USA ...

    • PolySonic_PLA Safety Data Sheet

      Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) 1. Product and Company Identification Product Name PolySonic_PLA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn ...

    • PolySonic PLA Pro Safety Data Sheet

      Safety Data Sheet 1. Product and Company Identification Product Name PolySonic PLA Pro Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email ...