"Rev1Tech 3DXSTAT™ ESD-PLA 3D Printing Filament - Technical Data Sheet"

3DXSTAT™ ESD-PLA Technical Data Sheet

Technical Data Sheet

3DXSTAT™ ESD-PLA 3D Printing Filament

Physical Properties    Standard    Unit     Typical Value
Density    ISO 1183    g/cc     1.26
Mechanical Properties     Standard       Unit     Typical Value
Tensile Strength, Break     ISO 527       MPa        55
Tensile Modulus     ISO 527       MPa        2560
Tensile Elongation, Break     ISO 527        % .       10
Flexural Strength    ISO 178      MPa        95
Flexural Modulus    ISO 178       MPa .     2980
Thermal Properties     Standard     Unit      Typical Value
Glass Transition Temperature (Tg)    DSC    °C        60
Deflection Temperature at 0.45 MPa (66psi)    ISO 75    °C        55
Electrical Property    Standard     Unit    Typical Value
Surface Resistance     ASTM D257     Ohm/sq       >107 - 109<

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specification limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.

Printed Specimen Conditions

  • Printer: Open Source FDM/FFF
  • Nozzle: 0.4mm
  • Layer Height: 0.25mm
  • Infill: 100%, +/- 45°
  • Extrusion Temp: 210°C
  • Bed Temp: 23°
  • Specimen Orientation: XY Flat

Visit our website for more information: www.Rev1Tech.com


    • Related Articles

    • Technical Data Sheet: CarbonX™ 20% Carbon Fiber PEEK 3D Printing Filament

      Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.39 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 126 Tensile Modulus ISO 527 MPa 10,100 Tensile Elongation, Break ISO ...

    • Technical Data Sheet: Obsidian™ Carbon Fiber Nylon 3D Filament

      Obsidian™ was developed for use in all Markforged printers as an alternative to Onyx™ Physical Properties Property Standard Unit Obsidian™ Onyx™ Density ASTM D792 g/cc 1.2 1.2 Mechanical Properties Property Standard Unit Obsidian™ Onyx™ Tensile ...

    • SAFETY DATA SHEET CarbonX® Carbon Fiber Reinforced PEEK [Polyether Ether Ketone]

      SAFETY DATA SHEET CarbonX® Carbon Fiber Reinforced PEEK [Polyether Ether Ketone] EFFECTIVE DATE: 08 / 01 / 2022 REVISION NUMBER: V1.1 1. PRODUCT AND SUPPLIER INFORMATION Product Identification: Product Name: CarbonX® Carbon Fiber Reinforced PEEK ...

    • SAFETY DATA SHEET Obsidian™ PA6+CF 3D Printing Filament

      SAFETY DATA SHEET Obsidian™ PA6+CF 3D Printing Filament EFFECTIVE DATE: 08 / 01 / 2022 REVISION NUMBER: V1.1 1 PRODUCT AND SUPPLIER INFORMATION Product Identification: Product Name: Obsidian™ PA6+Carbon Fiber (CF) Chemical Name: Polyamide (PA) ...

    • PolyMide_PA12-CF Technical Data Sheet

      Product Technical Data Sheet Product Name: PolyMide_PA12-CF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...