SAFETY DATA SHEET
Product Name: ESD_PC
Chemical Name: Polycarbonate (PC)
Recommended Use: Additive manufacturing
Supplier Information:
- Rev1Tech
- 904 36th Street, Suite B
- Grand Rapids, MI 49500
- Phone: +248-707-2950
- Email: info@rev1tech.com
2. HAZARDS IDENTIFICATION
Regulation (EC) NO 1272/2008: Not classified as a dangerous product
Physical Hazards: None
OSHA Regulatory Status: This product is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
| Components |
CAS No. |
Concentration Range (%) |
| Polycarbonate Resin |
26971-63-5 |
>90 |
| Carbon Additives |
1333-86-4 |
<10 |
4. EMERGENCY FIRST AID
- Eyes: Flush with water. Consult physician if symptoms persist.
- Skin Contact: Wash with soap and water. For thermal burns from molten polymer, immediately flush with cold water. Do not attempt to remove cooled polymer from skin. Obtain medical attention.
- Inhalation: Leave exposed area and seek fresh air. If irritation persists seek medical attention.
- Ingestion: Not likely due to nature of product. If ingested, drink plenty of water. Do not induce vomiting. Consult a physician if symptoms persist.
5. FIRE AND EXPLOSION HAZARD
- Extinguishing Media: Water spray, dry powder, and foam. Carbon dioxide (CO2)
- Safety Precautions: Persons exposed to products of combustion should wear NIOSH approved self-contained breathing apparatus and full protective equipment.
Prepared by: Business Management
Issued: 08/01/2022
This information set forth herein has been gathered from standard reference materials and/or supplier test data and is, to the best knowledge and belief of Rev1Tech, accurate and reliable. Such information is offered solely for your consideration, investigation and verification, and it is not suggested or guaranteed that the hazard precautions or procedures mentioned are the only ones which exist. Rev1Tech makes no warranties, expressed or implied, with respect to the use of such information or the use of the specific material identified herein in combination with any other material or process, and assumes no responsibility therefore.
Click here to shop 3dxstat ESD-PC.
END OF SDS
Related Articles
Polymaker PC-ABS Safety Data Sheet
Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...
Polymaker PC-ABS Technical Data Sheet
Polymaker PC-ABS Technical Data Sheet Polymaker™ PC-ABS is a PC/ABS polymer blend which offers excellent toughness and heat resistance while displaying good surface finish and good compatibility with metal plating. Physical Properties Property Test ...
ESD-ABS SAFETY DATA SHEET
SAFETY DATA SHEET ESD-ABS Effective Date: 08/01/2022 Revision Number: V1.1 1. Product and Supplier Information Product Name ESD-ABS Product Use 3D Printing Filament Manufacturer/Supplier Rev1Tech, 904 36th Street, Suite B, Grand Rapids, MI 49500, USA ...
PolyMax_PC Technical Data Sheet
Technical Data Sheet: PolyMax™ PC Product Name PolyMax_PC Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone +248-707-2950 ...
PolyMax™ PLA Safety Data Sheet
PolyMax™ PLA Safety Data Sheet According to Hazard Communication Standard (29 CFR 1910.1200) Version 1.0 | Issue date: 07/29/2019 | Revision date: 07/29/2019 | SDS record number: CSSS-TCO-010-132036 1. Product and Company Identification Product Name ...