"Rev1Tech 3DXSTAT™ ESD-PC 3D Printing Filament - Technical Data Sheet"

3DXSTAT™ ESD-PC Technical Data Sheet

Technical Data Sheet

3DXSTAT™ ESD-PC 3D Printing Filament

Physical PropertiesStandard          Unit        Typical Value
DensityISO 1183         g/cc     1.24
Mechanical PropertiesStandard       UnitTypical Value
Tensile Strength, BreakISO 527       MPa      68
Tensile ModulusISO 527       MPa      2300
Tensile Elongation, BreakISO 527          %.      6
Flexural StrengthISO 178       MPa      95
Flexural ModulusISO 178       MPa     2310
Thermal PropertiesStandard     UnitTypical Value
Glass Transition Temperature (Tg)DSC      °C    143
Deflection Temperature at 0.45 MPa (66psi)ISO 75      °C    135
Electrical Property    Standard       Unit    Typical Value
Surface ResistanceASTM D257     Ohm/sq.     >107 - 109<

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specification limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.

Printed Specimen Conditions

  • Printer: Open Source FDM/FFF
  • Nozzle: 0.4mm
  • Layer Height: 0.25mm
  • Infill: 100%, +/- 45°
  • Extrusion Temp: 295°C
  • Bed Temp: 130°C
  • Specimen Orientation: XY Flat

Visit our website for more information: www.Rev1Tech.com


Click here to shop 3dxstat ESD-PC.

    • Related Articles

    • PolyMax_PC Technical Data Sheet

      Technical Data Sheet: PolyMax™ PC Product Name PolyMax_PC Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone +248-707-2950 ...

    • Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament

      Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament TDS Rev 3.0 Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.07 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 45 ...

    • Polymaker PC-ABS Technical Data Sheet

      Polymaker PC-ABS Technical Data Sheet Polymaker™ PC-ABS is a PC/ABS polymer blend which offers excellent toughness and heat resistance while displaying good surface finish and good compatibility with metal plating. Physical Properties Property Test ...

    • PolyMax_PC_FR Technical Data Sheet

      Technical Data Sheet: PolyMax™ PC-FR Identification Product Name PolyMax PC-FR Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com ...

    • PolyMax-PETG Technical Data Sheet

      PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...