Technical Data Sheet: PolyMax™ PC-FR
Identification
| Product Name |
PolyMax PC-FR |
| Product Use |
3D Printing Filament |
| Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
| Address |
2901 Auburn Rd, Auburn Hills, MI 48326 |
| Contact Email |
info@rev1tech.com |
| Telephone |
+248-707-2950 |
| Emergency Telephone Number |
+248-707-2950 |
Description
PolyMax™ PC-FR, a creation from Covestro’s Makrolon® family, could achieve V0 performance in the UL94 flame retardancy test and displays excellent toughness, strength, and heat resistance. This filament opens new applications in the automotive, railway, and aerospace industries.
Technical Specifications
| Property |
Value |
| Density |
ISO1183, GB/T1033 1.2 g/cm3 at 23°C |
| Melt Index |
260°C, 5 kg 12-17 g/10min |
| Flame Retardancy |
UL94 V0 |
| Glass Transition Temperature |
DSC, 10°C/min 115 °C |
| Vicat Softening Temperature |
ISO 306 GB/T 1633 116 °C |
| Heat Deflection Temperature |
ISO 75 1.8MPa 107 °C |
| Young’s Modulus (X-Y) |
ISO 527, GB/T 1040 2634 ± 182 MPa |
| Tensile Strength (X-Y) |
ISO 527, GB/T 1040 67 ± 4.5 MPa |
Chemical Resistance
| Chemical |
Resistance |
| Weak Acids |
Slightly Resistant |
| Strong Acids |
Not Resistant |
| Weak Alkalis |
Slightly Resistant |
| Strong Alkalis |
Not Resistant |
| Organic Solvents |
Not Resistant |
Processing Guidelines
- Use an enclosure when printing with PolyMax™ PC-FR. For large parts, it is recommended to use a heated chamber.
- Anneal the printed part right after the printing process to release residual internal stress. Annealing settings: 90˚C for 2h.
Printing Parameters
| Parameter |
Value |
| Nozzle Temperature |
250 – 270 °C |
| Build Plate Temperature |
90 - 105 °C |
| Cooling Fan |
OFF |
| Printing Speed |
30-50 mm/s |
| Retraction Distance |
1 mm |
Disclaimer
The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.
Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Rev1Tech materials for the intended application. Rev1Tech makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Rev1Tech shall not be made liable for any damage, injury, or loss induced from the use of Rev1Tech materials in any application.
Click here to shop PolyMax PC-FR.