"Rev1Tech 3DXSTAT™ ESD-Safe Nylon 12 (PA12) 3D Filament - Technical Data Sheet"

3dxstat ESD-PA12 Technical Data Sheet

Technical Data Sheet

3DXSTAT™ ESD-Safe Nylon 12 (PA12) 3D Filament

Physical Properties Standard Unit Typical Value
Density ISO 1183 g/cc 1.14
Mechanical Properties Standard Unit Typical Value
Tensile Strength, Break ISO 527 MPa 68
Tensile Modulus ISO 527 MPa 6900
Tensile Elongation, Break ISO 527 % 3.8
Flexural Strength ISO 178 MPa 81
Flexural Modulus ISO 178 MPa 6700
Thermal Properties Standard Unit Typical Value
Glass Transition Temperature (Tg) DSC °C 158
Deflection Temperature at 0.45 MPa (66psi) ISO 75 °C 142
Electrical Property Standard Unit Typical Value
Surface Resistance ASTM D257 Ohm/sq >103 - 107

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specification limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.

Basic Printing Recommendations

  • Recommended Nozzle Diameter: Minimum 0.4mm
  • Layer Height: 0.25mm or 60% of nozzle diameter
  • Extrusion Temp: 265 - 285°C
  • Bed Temp: 90-110°C

Please note: Extrusion temperatures play a large role in surface resistance of a printed part. Higher extrusion temperatures yield lower surface resistance values. Likewise, lower extrusion temperatures yield higher surface resistance values. Therefore, the surface resistance of a printed part can be 'tuned' to your desired level of conductivity by modifying extrusion temp up or down.

Visit our website for more information: www.Rev1Tech.com


Click here to shop 3dxstat ESD-PA12.

    • Related Articles

    • Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament

      Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament TDS Rev 3.0 Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.07 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 45 ...

    • PolyMax-PETG Technical Data Sheet

      PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...

    • PolySonic PLA Pro Technical Data Sheet

      Technical Data Sheet: PolySonic PLA Pro Identification Product Name: PolySonic_PLA_Pro_ Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: ...

    • PolySonic™ PLA Technical Data Sheet

      PolySonic™ PLA Technical Data Sheet Product Name: PolySonic_PLA Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...

    • ESD-ABS SAFETY DATA SHEET

      SAFETY DATA SHEET ESD-ABS Effective Date: 08/01/2022 Revision Number: V1.1 1. Product and Supplier Information Product Name ESD-ABS Product Use 3D Printing Filament Manufacturer/Supplier Rev1Tech, 904 36th Street, Suite B, Grand Rapids, MI 49500, USA ...