FibreX™ PEEK GF20 Technical Data Sheet
Technical Data Sheet
FibreX™ PEEK GF20 3D Printing Filament
TDS Rev 1.0
Physical Properties
| Property |
Standard |
Unit |
Typical Value |
| Density |
ISO 1183 |
g/cc |
1.44 |
Mechanical Properties
| Property |
Standard |
Unit |
Typical Value |
| Tensile Strength, Break |
ISO 527 |
MPa |
105 |
| Tensile Modulus |
ISO 527 |
MPa |
7250 |
| Tensile Elongation, Break |
ISO 527 |
% |
2.5 |
| Flexural Strength |
ISO 178 |
MPa |
130 |
| Flexural Modulus |
ISO 178 |
MPa |
7625 |
Thermal Properties
| Property |
Standard |
Unit |
Typical Value |
| Glass Transition Temperature (Tg) |
DSC |
°C |
143 |
| Deflection Temperature at 0.45 MPa (66psi) |
ISO 75 |
°C |
300 |
Electrical Property
| Property |
Standard |
Unit |
Typical Value |
| Surface Resistance |
ASTM D257 |
Ohm/sq |
>1013 |
Printed Specimen Conditions
- Printer: Open Source 3D Printer
- Nozzle: 0.4mm
- Layer Height: 0.25mm
- Infill: 100%, +/- 45°
- Extrusion Temp: 400°C
- Bed Temp: 160°C
- Specimen Orientation: XY Flat
Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.
For more information, visit Rev1Tech.com
Click here to shop this material.
Related Articles
FibreX™ PP+GF30 3D Printing Filament Technical Data Sheet
Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.12 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 65 Tensile Modulus ISO 527 MPa 6750 Tensile Elongation, Break ISO 527 % ...
Technical Data Sheet: CarbonX™ 20% Carbon Fiber PEEK 3D Printing Filament
Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.39 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 126 Tensile Modulus ISO 527 MPa 10,100 Tensile Elongation, Break ISO ...
PolyMax-PETG Technical Data Sheet
PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...
Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament
Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament TDS Rev 3.0 Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.07 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 45 ...
PolyMide PA6 GF Technical Data Sheet
PolyMide PA6 GF Technical Data Sheet Product Name: PolyMide_PA6_GF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...