| Specification | Details |
|---|---|
| E-STEP | 800 @ 1/16 micro stepping 1600 @ 1/32 micro stepping |
| Tension | Adjustable with 5 fixed positions: 1-2 Rigid Materials, 2-3 Semi-flexible, 3-5 Flexible/Soft |
| Drive Wheels | Hardened Steel Nitrocarburized SS1914, Surface coating |
| Max Peak Current | 1.0A Recommended current: 550-650 mAh RMS |
| Top Fitting Tube OD | 4.10 mm |
| Stepper Motor | Nema14 Round Stepper 22mm Ø36mm |
| Materials Compatibility | Abrasive, rigid, semi-flexible, flexible, and soft |
| Motor Connector | JST-XH 4-pin connector |
| Mounting | Bottom (4 points); Right (2 points); Left (1 point); Front to motor (2 points); Top (1 point) |
| Filament Diameter | 1.75 mm |
| Max Tightening Torque | 0.3Nm |
| Lubrications | Berutox FB22 Visual inspection every 100 print hours. Clean and apply new lubrication on the gears. |
| Housing | PA 12 GF SLS printed housings with glass filled Nylon (PA12 GF) |
| CE Certified | Yes |
| Working Temperature | Up to 100°C Motor self-heating ~80°C @ 1000mA + Chamber temp must not exceed 180°C |
| RoHS | Yes |
| Weight | 187 g Net weight |
| Motor Insulation Class | Class-H Up to 180°C |
| Item Ref. | Qty. | Description | Article Number |
|---|---|---|---|
| 1 | 2 | Needlebearing | K3X5X7 |
| 2 | 2 | Hardened Cylindrical Shaft 3x16 | STIFT3X16M6 |
| 3 | 1 | Hardened Cylindrical Shaft 4x20 | STIFT4X20M6 |
| 4 | 2 | Low Head Cap Screw Black Oxide M3x25 | M3X25L |
| 5 | 8 | Fyrkantsmutter M3 | FKM3 |
| 6 | 4 | Polyamide Washer M3 0,5 | BRICKAM3PLAST |
| 7 | 1 | Pushfit collar 4mm | 12016 |
| 8 | 1 | LGX Lite PRO Front | 10093-5 |
| 9 | 1 | LGX Lite PRO Rear | 10093-6 |
| 10 | 2 | Assembled LGX Drivegear Steel 1.75 V2 | 15162 |
| 11 | 1 | Assembled LGX Double-Gear Metal | 15146 |
| 12 | 2 | Ball spring plungers metal 4x6mm | GN614NI4 |
| 13 | 1 | LGX Lite PRO Lever 4 Position Long | 03MCH14PLT00027 |
| 14 | 1 | LGX Lite PRO Lever 4 Position Short | 03MCH14PLT00028 |
| 15 | 1 | LGX Lite PRO Stepper Motor | 01LCT00STM00008 |