| SKU | EXT-LGX |
|---|---|
| ESTEP | 400 @ 16-bit micro stepping 800 @ 32-bit micro stepping |
| Push Force | 4-7.5kg |
| Drive Wheels | Hardened Steel Nitrocarburized SS1914, Surface coating |
| Tension | Adjustable with 5 fixed positions 1-2 Rigid Materials 2-3 Semi-Flexible 3-5 Flexible/Soft |
| Top Fitting Tube OD | 4.10 mm |
| Max Peak Current | 1.0A (Recommended current 450-600mA) |
| Materials Compatibility | Abrasive, rigid, semi-flexible, flexible and soft |
| Stepper Motor | Nema17 25mm pancake stepper motor |
| Mounting | Bottom (2 points); right (2 points), left (2 points), front to motor (3 points) |
| Motor Connector | S6B-PH-K-S connector |
| Max Tightening Torque | 0.3 Nm |
| Filament Diameter | 1.75 mm |
| Housing | PA 12 GF SLS printed housings with glass filled Nylon (PA12 GF) |
| Working Temperature | Up to 100°C |
| Motor Self-Heating | ~80°C @ 1000mA + Chamber temp must not exceed 180°C |
| Weight | 227 g Net weight |
| Motor Insulation Class | Class-H Up to 180°C |
| Certifications | CE Certified, RoHS, REACH |
| Item Ref. | Qty. | Description | Article Number |
|---|---|---|---|
| 1 | 2 | CPK DIN 6325 Hardened Cyl. Pin | - |
| 2 | 1 | Hardened Cylindrical Shaft 4x24 | STIFT4X24M6 |
| 3 | 6 | Square Nut M3 | - |
| 4 | 3 | Low Head Cap Screw Black Oxide M3x30 | M3X30L |
| 5 | 1 | Low Head Cap Screw Black Oxide M3x10 | M3X10L |
| 6 | 1 | Thread insert M3x5.2 | 001/M3 |
| 7 | 1 | Push fit collar 4mm | 12016 |
| 8 | 2 | Needle bearing K3X5X7 | - |
| 9 | 1 | LGX Rear GF | 10098-03 |
| 10 | 1 | LGX Middle GF | 10098-02 |
| 11 | 1 | LGX Front GF | 10098-01 |
| 12 | 1 | Epoxy cover | LGX T1005 |
| 13 | 1 | 44T/17T Double gear PBT 20% GF | 15070 |
| 14 | 1 | LGX Lever long | 15094 |
| 15 | 1 | LGX Lever short | 15095 |
| 16 | 1 | LGX Spring | 15079 |
| 17 | 2 | Assembled LGX Drivegear 1.75 | 15134 |
| 18 | 4 | Hex stud screw M3x18 | M3X18STUD5OBE |
| 19 | 1 | Nema17 Pancake Stepper 25mm | 13007 |
| 20 | 1 | LGX Direct Drive Interface Plug | 10073-4 |