ThermaX™ PEEK Technical Data Sheet
Technical Data Sheet
ThermaX™ PEEK 3D Printing Filament
TDS Rev 3.0
| Physical Properties |
| Standard |
Unit |
Metric |
| Density |
ISO 1183 |
g/cc 1.30 |
| Mechanical Properties |
| Standard |
Unit |
Metric |
| Tensile Strength |
ISO 527 |
MPa 100 |
| Tensile Modulus |
ISO 527 |
MPa 3720 |
| Tensile Elongation |
ISO 527 |
% 28 |
| Flexural Strength |
ISO 178 |
MPa 130 |
| Flexural Modulus |
ISO 178 |
MPa 2700 |
| Thermal Properties |
| Standard |
Unit |
Metric |
| Glass Transition Temperature (Tg) |
DSC |
°C 143 |
| Deflection Temperature at 0.45 MPa (66psi) |
ISO 75 |
°C 140 |
| Fire Testing* |
| Standard |
Unit |
Typical Value |
| Flamability Rating (*Base Resin) |
UL 94 |
V-0 @ 1.5mm |
Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.
- Printer: Open Source FDM/FFF
- Nozzle: 0.4mm
- Layer Height: 0.25mm
- Infill: 100%, +/- 45°
- Extrusion Temp: 380-400°C
- Bed Temp: 130-140°C
- Specimen Orientation: XY Flat
Related Articles
Technical Data Sheet: CarbonX™ 20% Carbon Fiber PEEK 3D Printing Filament
Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.39 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 126 Tensile Modulus ISO 527 MPa 10,100 Tensile Elongation, Break ISO ...
PolyMax-PETG Technical Data Sheet
PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...
Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament
Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament TDS Rev 3.0 Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.07 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 45 ...
ThermaX™ PEEK SAFETY DATA SHEET
SAFETY DATA SHEET ThermaX™ PEEK [Polyether Ether Ketone] EFFECTIVE DATE: 08/01/2022 REVISION NUMBER: V1.1 1. PRODUCT AND SUPPLIER INFORMATION Product Name ThermaX PEEK Product Use 3D Printing Filament Manufacturer/Supplier Rev1Tech Address 2901 ...
PolySonic™ PLA Technical Data Sheet
PolySonic™ PLA Technical Data Sheet Product Name: PolySonic_PLA Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...