PolyMide PA12-CF 3D Printing Filament: Safety Data Sheet | Rev1Tech

PolyMide PA12-CF Safety Data Sheet

PolyMide PA12-CF Safety Data Sheet

1. Identification

Product Name PolyMide_PA12-CF
Product Use 3D Printing Filament
Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd.
Address 2901 Auburn Rd, Auburn Hills, MI 48326
Contact Email info@rev1tech.com
Telephone +248-707-2950
Emergency Telephone Number +248-707-2950

2. Hazards Identification

  • GHS Classification: Not classified for physical, health, or environmental hazards.
  • GHS Label Elements: No hazard pictogram is used.
  • Signal Word: No signal word is used.
  • Hazard Statement: Not applicable.
  • Precautionary Statement: Not applicable for prevention, response, storage, or disposal.
  • Other Hazards: Not available.

3. Composition / Information on Ingredients

Components CAS# Percent
Chopped Carbon Fiber 7440-44-0 5-30%

4. First Aid Measures

  • Eye Contact: Flush with running water for at least 15 minutes. If irritation persists, get medical attention.
  • Skin Contact: Wash thoroughly with soap and water. Get medical attention if irritation persists.
  • Inhalation: Move to fresh air and rest comfortably. Seek medical attention if unwell.
  • Ingestion: Contact a physician or poison control center for advice.
  • Notes to Physician: Treat symptoms.

5. Fire Fighting Measures

  • Flammable Properties: Not available.
  • Suitable Extinguishing Media: Use extinguishers suitable for surrounding fire.
  • Firefighting Instructions: Wear self-contained breathing apparatus if necessary.
  • Hazardous Combustion Products: Carbon oxides.

6. Accidental Release Measures

  • Personal Precautions: Use personal protective equipment and ensure adequate ventilation.
  • Environmental Precautions: Avoid release into drainage systems.
  • Methods for Cleaning Up: Sweep up and shovel into suitable containers.

7. Handling and Storage

  • Handling: Ensure good ventilation. Wash thoroughly after handling.
  • Storage: Store in a cool, dry, well-ventilated place. Keep containers tightly closed.

8. Exposure Controls / Personal Protection

  • Occupational Exposure Limits: US OSHA: TWA 5 mg/m³ (respirable fraction), 15 mg/m³ (total dust)
  • Engineering Controls: Handle with good industrial hygiene practices.
  • Personal Protection: No special protection required under normal conditions.

9. Physical & Chemical Properties

Appearance Solid, Black
Melting Point 179°C
Solubility (Water) Insoluble
Relative Density 1.02

10. Chemical Stability & Reactivity Information

  • Chemical Stability: Stable under normal conditions.
  • Incompatible Materials: Strong oxidizing agents.
  • Hazardous Decomposition Products: Carbon oxides.

11. Toxicological Information

  • Acute Toxicity: Not available
  • Skin Corrosion/Irritation: Not classified
  • Serious Eye Damage/Irritation: Not classified
  • Respiratory or Skin Sensitization: Not classified
  • Carcinogenicity: Not classified

12. Ecological Information

  • Ecotoxicity: Not available
  • Persistence and Degradability: Not available.
  • Bioaccumulative Potential: Not available.

13. Disposal Considerations

  • Disposal Instructions: Dispose in accordance with local regulations.

14. Transport Information

  • UN Number: Not regulated
  • Proper Shipping Name: Not regulated
  • Hazard Class: Not regulated

15. Regulatory Information

  • US Federal Regulations: Not regulated under CERCLA, SARA, CAA, or SDWA.

16. Other Information

  • HMIS® Ratings: Health: 0, Flammability: 1, Physical Hazard: 0
  • NFPA Ratings: Health: 0, Flammability: 1, Instability: 0
  • Disclaimer: Information provided based on current knowledge and experience.


    Click here to shop PolyMide_PA12-CF.
    • Related Articles

    • PolyMide™ CoPA Safety Data Sheet

      PolyMide CoPA Safety Data Sheet 1. Identification Product Name PolyMide_CoPA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com ...
    • SAFETY DATA SHEET Obsidian™ PA6+CF 3D Printing Filament

      SAFETY DATA SHEET Obsidian™ PA6+CF 3D Printing Filament EFFECTIVE DATE: 08 / 01 / 2022 REVISION NUMBER: V1.1 1 PRODUCT AND SUPPLIER INFORMATION Product Identification: Product Name: Obsidian™ PA6+Carbon Fiber (CF) Chemical Name: Polyamide (PA) ...
    • Polymaker PC-ABS Safety Data Sheet

      Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...
    • PolyMide_PA12-CF Technical Data Sheet

      Product Technical Data Sheet Product Name: PolyMide_PA12-CF Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...
    • PolyMide CoPA Technical Data Sheet

      PolyMide CoPA Technical Data Sheet Identification Product Name PolyMide_CoPA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com ...