| Product Name | PolyLite ASA |
|---|---|
| Product Use | 3D Printing Filament |
| Manufacturer/Supplier | JF Polymers (Suzhou) Co., Ltd. |
| Address | 2901 Auburn Rd, Auburn Hills, MI 48326 |
| Contact Email | info@rev1tech.com |
| Telephone | +248-707-2950 |
| Emergency Telephone Number | +248-707-2950 |
| GHS Classification | No classification |
|---|---|
| Physical Hazards | Not classified |
| Health Hazards | Not classified |
| Environmental Hazards | Not classified |
Signal Word: No signal word used.
Hazard Statement: Not applicable.
| Components | CAS # | Percent |
|---|---|---|
| ASA | 25852-47-3 | 97-100% |
| Typical Stabilizers & Lubricants | N/A | 0-3% |
Eye Contact: Flush with water for at least 15 minutes. If irritation persists, seek medical attention.
Skin Contact: Wash thoroughly with soap and water. If irritation persists, seek medical attention.
Inhalation: Move to fresh air. If you feel unwell, seek medical attention.
Ingestion: Contact a physician or poison control center for advice.
Notes to Physician: Treat symptoms.
Suitable Extinguishing Media: Use extinguishers suitable for surrounding fire.
Firefighting Equipment: Wear self-contained breathing apparatus if necessary.
Hazardous Combustion Products: Carbon oxides.
Personal Precautions: Use personal protective equipment. Ensure adequate ventilation.
Environmental Precautions: Avoid disposal into drainage systems.
Methods for Cleaning Up: Sweep up and shovel into containers. Clean the affected area.
Handling: Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.
Storage: Store in a cool, dry, and well-ventilated place. Keep containers tightly closed.
Occupational Exposure Limits: No exposure limits noted.
Engineering Controls: Handle with good industrial hygiene and safety practices.
Personal Protection: No special protection required.
| Appearance | Milky Solid |
|---|---|
| Odor | Odorless |
| Melting Point | Not available |
| Solubility (water) | Insoluble |
| Relative Density | 1.07 |
Reactivity: Stable under normal conditions.
Chemical Stability: Material is stable.
Incompatible Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon oxides.
Acute Toxicity: Not available.
Skin Corrosion/Irritation: Not classified.
Serious Eye Damage/Irritation: Not classified.
Carcinogenicity: Not classified.
Persistence and Degradability: Not available.
Bioaccumulative Potential: Not available.
Mobility in Soil: Not available.
Disposal Instructions: Dispose in accordance with regulations.
DOT: Not regulated.
IATA: Not regulated.
IMDG: Not regulated.
US Federal Regulations: Not regulated.
Other Federal Regulations: Not regulated.
Issue Date: 04-17-2019
Disclaimer: The information provided is based on the best knowledge and experience currently available.
Click here to shop PolyLite ASA.