PolyLite Safety Data Sheet | 3D Printing Filament SDS | Rev1Tech

PolyLite™ ABS Safety Data Sheet

Safety Data Sheet

According to Hazard Communication Standard (29 CFR 1910.1200)

1. Product and Company Identification

Product Name PolyLite™ ABS
Product Use 3D Printing Filament
Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd.
Address 2901 Auburn Rd, Auburn Hills, MI 48326
Contact Email info@rev1tech.com
Telephone +248-707-2950
Emergency Telephone Number +248-707-2950

2. Hazards identification

GHS classification

Physical hazards: Not classified

Health hazards: Not classified

Environmental hazards: Not classified

GHS label elements

Hazard Pictograms: No hazard pictogram is used.

Signal word: No signal word is used.

Hazard statement: Not applicable.

Precautionary statement

Prevention: Not applicable.

Response: Not applicable.

Storage: Not applicable.

Disposal: Not applicable.

Other hazards: Not available.

3. Composition / Information on Ingredients

This product does not contain hazardous ingredients above cut-off value according to HCS2012.

4. First Aid Measures

First aid procedures

  • Eye contact: None expected to require first aid measures. Flush with running water for at least 15 minutes. If irritation persists get medical attention.
  • Skin contact: None expected to require first aid measures. Wash thoroughly with soap and water. Get medical attention in the unlikely event that irritation persists.
  • Inhalation: None expected to require first aid measures. If breathed in, remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical attention.
  • Ingestion: Immediate first aid is not likely to be required. A physician or poison control center can be contacted for advice.

Notes to physician: Treat symptoms.

5. Fire Fighting Measure

Flammable properties: Not available.

Extinguishing media

  • Suitable extinguishing media: Water spray, alcohol-resistant foam, dry powder, or carbon dioxide.
  • Unsuitable extinguishing media: Avoid using DC water to extinguish fire, so as to avoid material splashes and fire spread.

Firefighting equipment/instructions: Wear self contained breathing apparatus for fire fighting if necessary.

Hazardous combustion products: Carbon oxides, Nitrogen oxides.

6. Accidental Release Measures

Personal precautions: Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas.

Environmental precautions: Avoid disposing into drainage/sewer system or directly into the aquatic environment.

Methods for cleaning up: Sweep up and shovel into suitable containers. Clean up affected area.

7. Handling and Storage

Handling: Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.

Storage: Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

8. Exposure Controls / Personal Protection

Occupational exposure limits: This substance has no PEL, TLV, or other recommended exposure limit.

Biological limit values: No biological exposure limits noted for the ingredient(s).

Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Individual protection measures, such as personal protective equipment:

  • Eye / face protection: No special protection required.
  • Skin protection: No special protection required.
  • Respiratory protection: No special protection required.
  • General hygiene considerations: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.

9. Physical & Chemical Properties

Appearance Solid
Form Solid
Color Milky white
Odor Not available
Odor threshold Not available
pH Not available
Vapor pressure Not available
Vapor density Not available
Boiling point Not available
Melting point/Freezing point 210°C
Solubility (water) Insoluble
Relative Density 1.1
Flash point Not available
Partition coefficient Not available
Flammability limits in air, upper, %by volume Not available
Flammability limits in air, lower, % by volume Not available
Auto-ignition temperature Not available
VOC Not available
Percent volatile Not available
Molecular Formula Not available
Molecular Weight Not available
Other data Viscosity: Not available, Dissociation constant: Not available

10. Chemical Stability & Reactivity Information

Reactivity: The substance is stable under normal storage and handling conditions.

Chemical stability: Material is stable under normal conditions.

Conditions to avoid: Incompatible materials.

Incompatible materials: Strong oxidizing agents.

Hazardous decomposition products: Carbon oxides, Nitrogen oxides.

Possibility of hazardous reactions: No hazardous reactions known.

11. Toxicological Information

Toxicokinetics, metabolism and distribution: Non-human toxicological data: Not available

Information on toxicological effects:

  • Acute toxicity:
    • LD50(Oral, Rat): Not available
    • LD50(Dermal, Rabbit): Not available
    • LC50(Inhalation, Rat): Not available
  • Skin corrosion/Irritation: Not classified
  • Serious eye damage/irritation: Not classified
  • Respiratory or skin sensitization: Not classified
  • Germ cell mutagenicity: Not classified
  • Carcinogenicity: Not classified
  • Reproductive toxicity: Not classified
  • STOT- single exposure: Not classified
  • STOT-repeated exposure: Not classified
  • Aspiration hazard: Not classified

12. Ecological Information

Toxicity:

Acute toxicity Time Species Method Evaluation Remarks
LC50 N/A 96h Fish OECD 203 N/A N/A
EC50 N/A 48h Daphnia OECD 202 N/A N/A
EC50 N/A 72h Algae OECD 201 N/A N/A

Persistence and degradability: Not available.

Bioaccumulative potential: Not available.

Mobility in soil: Not available.

Results of PBT & vPvB assessment: Not available.

Other adverse effects: Not available.

13. Disposal Considerations

Disposal instructions: Dispose of contents/container in accordance with local/regional/national/international regulations.

Contaminated packaging: Since emptied containers may retain product residue, follow label warnings even after container is emptied.

14. Transport Information

DOT
  • UN number: Not regulated
  • Proper shipping name: Not regulated
  • Hazard class: Not regulated
  • Packing group: Not regulated
  • Environmental hazards: No
IATA
  • UN number: Not regulated
  • UN proper shipping name: Not regulated
  • Transport hazard class(es): Not regulated
  • Packing group: Not regulated
  • Environmental hazards: No
IMDG
  • UN number: Not regulated
  • UN proper shipping name: Not regulated
  • Transport hazard class(es): Not regulated
  • Packing group: Not regulated
  • Environmental hazards: No

15. Regulatory Information

US federal regulations

  • Toxic Substances Control Act (TSCA): Not regulated
  • CERCLA Hazardous Substance List (40 CFR 302.4): Not listed
  • SARA 304 Emergency release notification: Not regulated
  • OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053): Not regulated
  • SARA 302 Extremely hazardous substance: Not listed
  • SARA 311/312 Hazardous chemical: No
  • SARA 313 (TRI reporting): Not regulated

Other federal regulations

  • Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List: Not regulated
  • Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130): Not regulated
  • Safe Drinking Water Act (SDWA): Not regulated

16. Other Information

HMIS® ratings

  • Health: 0
  • Flammability: 1
  • Physical hazard: 0

NFPA ratings

  • Health: 0
  • Flammability: 1
  • Instability: 0

Disclaimer: The information in the sheet was written based on the best knowledge and experience currently available.

Issue date: 07-29-2019

Author: Hangzhou C&K Testing Technic Co., Ltd

Website: www.rev1tech.com

Tel: 0571-89900715

Email: test@cirs-group.com


Click here to shop PolyLite™ ABS.


    • Related Articles

    • Polymaker PC-ABS Safety Data Sheet

      Safety Data Sheet 1. Identification Material Name: Polymaker™ PC-ABS Company: JF Polymers (Suzhou) Co. Ltd Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China Tel/Fax: ...

    • Polylite ABS Tech data sheet

      Product Technical Data Sheet Identification Product Name: Polylite ABS Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...

    • PolyLite PC Safety Data Sheet

      Safety Data Sheet PolyLite PC Version: 1.0 Issue Date: 07/29/2019 Revision Date: 07/29/2019 1. Product and Company Identification Product Name: PolyLite PC Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. ...

    • Polymaker PC-ABS Technical Data Sheet

      Polymaker PC-ABS Technical Data Sheet Polymaker™ PC-ABS is a PC/ABS polymer blend which offers excellent toughness and heat resistance while displaying good surface finish and good compatibility with metal plating. Physical Properties Property Test ...

    • PolyLite LW-PLA Safety Data Sheet

      Safety Data Sheet Product Identification Product Name PolyLite LW-PLA Product Use 3D Printing Filament Manufacturer/Supplier JF Polymers (Suzhou) Co., Ltd. Address 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email info@rev1tech.com Telephone ...