PolyDissolve™ S1 Technical Data Sheet
Identification
| Product Name |
PolyDissolve™ S1 |
| Product Use |
3D Printing Filament |
| Manufacturer/Supplier |
JF Polymers (Suzhou) Co., Ltd. |
| Address |
2901 Auburn Rd, Auburn Hills, MI 48326 |
| Contact Email |
info@rev1tech.com |
| Telephone |
+248-707-2950 |
| Emergency Telephone Number |
+248-707-2950 |
Physical Properties
| Density |
1.13 g/cm³ at 23 °C |
| Melt Index |
7.8 g/10min at 220°C, 2.16kg |
| Light Transmission |
N/A |
| Flame Retardancy |
N/A |
| Equilibrium Water Absorption |
10.21% |
Material Compatibility
| PLA based material from Rev1tech’s portfolio |
++ |
| PETG based material from Rev1tech’s portfolio |
+ |
| ABS based material from Rev1tech’s portfolio |
-- |
| PC based material from Rev1tech’s portfolio |
-- |
| PVB based material from Rev1tech’s portfolio |
++ |
| TPU based material from Rev1tech’s portfolio |
++ |
| Nylon based material from Rev1tech’s portfolio |
++ |
Printing Guidelines
| Nozzle Temperature |
215 – 225 °C |
| Build Surface Material |
BuildTak®, Glass, Blue Tape |
| Build Surface Treatment |
Glue |
| Build Plate Temperature |
25 - 60 °C |
| Cooling Fan |
ON |
| Printing Speed |
30-40 mm/s |
| Raft Separation Distance |
0 mm |
| Retraction Distance |
1 mm |
| Retraction Speed |
20 mm/s |
| Environmental Temperature |
Room temperature |
Additional Notes
* Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different nozzle diameters. It is highly recommended to use the PolyBox™ when printing with PolyDissolve™ S1 and to store it in the resealable bag.
Disclaimer
The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice.
Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Rev1tech materials for the intended application. Rev1tech makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Rev1tech shall not be made liable for any damage, injury, or loss induced from the use of Rev1tech materials in any application.
Click here to shop polydissolve S1.