DDG™ Extruder for Ultimaker 2+ and 3

The DDG™ Extruder for Ultimaker 2+/3 feeds filament without grinding and provides a firm grip on the filament. This allows for faster printing without under-extrusion problems, even on high retraction prints like Voroni models.

The original stepper motor of the printer is reused, and the extruder is mounted in the same position and using the same mounting holes as the factory extruder, making the installation easy and fast.

Ultimaker 2+ Upgrade Contains:

• One right-hand DDG™ extruder

Ultimaker 3 Upgrade Contains:

• One right-hand DDG™ extruder
• One left-hand DDG™ extruder

The picture and drawing show the right-hand edition.

Technical Specifications

• EAN-Code U2+: 7350011412044
• EAN-Code U3: 7350011412051
• Net Weight: 112.5g
• Gross Weight: 161.5g
• Package Dimension: 137×94×65mm
• Gearing Ratio: Original used (3.27:1)
• Filament Diameter: 2.85mm
• Operating Temperature: 0–80°C
• E-steps Value: 311