3DXMAX® Polycarbonate 3D Printing Filament - Technical Data Sheet | Rev1Tech

3DXMAX® Polycarbonate Technical Data Sheet

Technical Data Sheet

3DXMAX® Polycarbonate 3D Printing Filament

Physical Properties

Property Standard Unit Typical Value
Density ISO 1183 g/cc 1.2

Mechanical Properties

Property Standard Unit Typical Value
Tensile Strength, Break ISO 527 MPa 62
Tensile Modulus ISO 527 MPa 2410
Tensile Elongation, Break ISO 527 % 7
Flexural Strength ISO 178 MPa 78
Flexural Modulus ISO 178 MPa 2200

Thermal Properties

Property Standard Unit Typical Value
Glass Transition Temperature (Tg) DSC °C 147
Deflection Temperature at 0.45 MPa (66psi) ISO 75 °C 135

Electrical Property

Property Standard Unit Typical Value
Surface Resistance ASTM D257 Ohm/sq >1013

Printed Specimen Conditions

  • Printer: Open Source FDM/FFF
  • Nozzle: 0.4mm
  • Layer Height: 0.25mm
  • Infill: 100%, +/- 45°
  • Extrusion Temp: 275-295°C
  • Bed Temp: 110-120°C
  • Specimen Orientation: XY Flat

Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specific use.
For more information, visit Rev1Tech.com



                 Click here to shop 3DXMAX PC .

    • Related Articles

    • PolyMax-PETG Technical Data Sheet

      PolyMax-PETG Technical Data Sheet Identification Product Name: PolyMax-PETG Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com ...

    • Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament

      Technical Data Sheet: 3DXMAX™ ASA 3D Printing Filament TDS Rev 3.0 Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.07 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 45 ...

    • PolySonic™ PLA Technical Data Sheet

      PolySonic™ PLA Technical Data Sheet Product Name: PolySonic_PLA Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: info@rev1tech.com Telephone: ...

    • PolySonic PLA Pro Technical Data Sheet

      Technical Data Sheet: PolySonic PLA Pro Identification Product Name: PolySonic_PLA_Pro_ Product Use: 3D Printing Filament Manufacturer/Supplier: JF Polymers (Suzhou) Co., Ltd. Address: 2901 Auburn Rd, Auburn Hills, MI 48326 Contact Email: ...

    • AmideX™ PA6 Copolymer 3D Printing Filament tech data sheet

      Technical Data Sheet: AmideX™ PA6 Copolymer 3D Printing Filament Physical Properties Property Standard Unit Typical Value Density ISO 1183 g/cc 1.12 Mechanical Properties Property Standard Unit Typical Value Tensile Strength, Break ISO 527 MPa 55 ...